Garmin G600 Pilots Guide - Page 201

Foreword 5.5.3.2 Selecting an XM Radio Channel The Channel feature is used to navigate through the channels in the selected category. Sec 1 System Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Figure 5-15 XM Channel Selection 1) While viewing the XM Radio page of the AUX page group, press the small MFD knob and then turn the small MFD knob to select the desired channel. 2) Press ENT to make the highlighted channel the Active Channel. NOTE: A delay of several seconds may occur when selecting a channel. The listed title may end before the radio begins playing the current Active Channel material. 3) Press the small MFD knob to cancel selection or to end editing. Or 4) Press CHNL and then the CH + or CH - soft keys to increment up or down one channel at a time in the active category. Or 5) Press CHNL and then the DIR CH soft key to directly select a channel in the active category. Use the large and small MFD knobs to select desired channel. 6) Press ENT to save the selection or press the small MFD knob to cancel selection. 190-00601-02 Rev. B Garmin G600 Pilot's Guide 5-21 Appendix B Index