Garmin G600 Pilots Guide - Page 165

Foreword Sec 1 System 1) While viewing a WX Data Link Map page of the WX page group, press the MENU key to display the Page Menu Options. The cursor flashes on the "Weather Setup" option. Press ENT. 2) Turn the large MFD knob to highlight the Lightning Data Viewing Range value. 3) Turn the small MFD knob to highlight the desired value. Press ENT to accept the displayed value. The next option will be highlighted. 4) Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option. 4.4.9 Cell Movement Cell Movement data shows the location and movement of storm cells as identified by a ground-based system. Cells are represented by yellow squares, with direction of movement indicated with short, orange arrows. Sec 2 PFD Sec 3 MFD Sec 4 Hazard Avoidance Features Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Figure 4-24 XM Weather - Cell Movement On most applicable maps, Cell Movement data is selected for display along with NEXRAD. On the Weather Data Link Page, Cell Movement data can be selected independently. 190-00601-02 Rev. B Garmin G600 Pilot's Guide 4-39 Index