Garmin G600 Pilots Guide - Page 75

Foreword Sec 1 System Sec 2 PFD Track Vector Length When turned on, the Track Vector Length option will show a dashed line and arrow extending from the aircraft icon illustrating the current Track and the distance the aircraft will travel in the selected time. Aircraft Present Position Track Vector Figure 3-19 Navigation Map Track Vector 1) While viewing the Navigation Map 1 or 2 of the Map page group, press the MENU key. With "Map Setup" highlighted, press ENT. With the Map Group active, turn the large MFD knob to highlight the "Track Vector Length" option. 2) Turn the small MFD knob to select the Track Vector Length time value or Off. Sec 3 MFD Sec 4 Hazard Avoidance Features Sec 5 Additional Sec 6 Annun. & Alerts Sec 7 Symbols Sec 8 Glossary Appendix A Appendix B Index Figure 3-20 Navigation Map Track Vector Length Selection 3) Press ENT to accept the highlighted value. The next option will be highlighted. 4) Press the small MFD knob to cancel selection or to end editing and return to the Navigation Map page or turn the large MFD knob to the next option. 190-00601-02 Rev. B Garmin G600 Pilot's Guide 3-17