Gigabyte GA-970A-UD3P Manual - Page 45
Peripherals, OnChip SATA Port4/5 Type SATA3 4/SATA3 5 connectors - raid
View all Gigabyte GA-970A-UD3P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
2-6 Peripherals && OnChip SATA Controller Enables or disables the integrated SATA controllers. (Default: Enabled) && OnChip SATA Type Enables or disables RAID for the SATA controllers integrated in the Chipset or configures the SATA controllers to AHCI mode. Native IDE Configures the SATA controller to IDE mode. RAID Enables RAID for the SATA controller. AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface (AHCI) is an interface specification that allows the storage driver to enable advanced Serial ATA features such as Native Command Queuing and hot plug. (Default) && OnChip SATA Port4/5 Type (SATA3 4/SATA3 5 connectors) This option is configurable only when OnChip SATA Type is set to RAID or AHCI. Configures the operating mode of the integrated SATA3 4~SATA3 5 connectors. As SATA Type The mode depends on the OnChip SATA Type settings. IDE Configures the SATA3 4~SATA3 5 connectors to PATA mode. (Default) && HD Audio Azalia Device Enables or disables the onboard audio function. (Default: Enabled) If you wish to install a 3rd party add-in audio card instead of using the onboard audio, set this item to Disabled. && Onboard USB Device Enables or disables the integrated USB controller. (Default: Enabled) && USB3.0 Controller (VIA® VL805 USB Controller) Enables or disables the VIA® VL805 USB controller. (Default: Enabled) - 45 - BIOS Setup