Gigabyte GA-970A-UD3P Manual - Page 60

View Drive Assignments The View Drive Assignments option in the Main Menu displays whether the attached hard drives are assigned to a disk array or are unassigned. Under the Assignment column, drives are labeled with their assigned disk array or shown as Free if unassigned. Option ROM Utility (c) 2011 Advanced Micro Devices, Inc. [ View Drives Assignments ] Port:ID Drive Model Capabilities Capacity (GB) Assignment 01:00 WDC WD800JD-22LSA0 SATA 3G 79.89 [S.M.A.R.T.] Health Extent 1 79.82 LD 1-1 02:00 WDC WD800JD-22LSA0 SATA 3G 80.2 [S.M.A.R.T.] Health Extent 1 80.02 LD 1-2 [ Keys Available ] [h] Up [i] Down [PaUp/PaDn] Switch Page [Ctrl+H] Secure Erase [ESC] Exit Figure 9 Delete an Array The Delete Array menu option allows for deletion of disk array assignments. Deleting an existing disk array could result in loss of data. Record all array information including the array type, the disk members, and stripe block size in case you wish to undo a deletion. 1. To delete an array, press in the Main Menu to enter the Delete LD Menu. Then highlight the array you wish to delete and press the key or the + keys. 2. The View LD Definition Menu will appear (as shown in Figure 10) showing which drives are assigned to this array. Press + if you are sure to delete the array or other keys to abort. 3. When the array is deleted, the screen will return to Delete LD Menu. Press to return to Main Menu. Option ROM Utility (c) 2011 Advanced Micro Devices, Inc. LD No LD Name [ View LD Definition Menu ] RAID Mode Drv Capacity(GB) LD 1 GBT RAID 0 2 80 Stripe Block Read Policy 64 KB Read Ahead Sector Size 512 B Write Policy WriteBack Port:ID 01:00 02:00 [ Drives Assignments ] Drive Model WDC WD800JD-22LSA0 WDC WD800JD-22LSA0 Capabilities SATA 3G SATA 3G Capacity (GB) 79.89 80.02 Press Ctrl-Y to delete the data in the disk! or press any othe[[rKKkeeeyyysstAoAvavabaiolialratb.bl..ele]] Configuring SATA Hard Drive(s) Figure 10 - 60 -