Gigabyte GA-N680SLI-DQ6 Manual - Page 44

English On-Chip IDE Channel0 Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. IDE Prefetch Mode Enabled Enable IDE data buffer to enhance HDD transfer speed. (Default value) Disabled Disable IDE data buffer for the system stability. NV Serial-ATA Controller All Enabled Enable NV Serial-ATA Controller function. (Default value) SATA-1 SATA-1+2 Disabled Enable NV SATA-1 function. Enable NV SATA-1+2 function Disable this function. Serial-ATA RAID Config CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Serial-ATA RAID Config NV SATA RAID function x NV SATA 1 Primary RAID x NV SATA 1 Secondary RAID x NV SATA 2 Primary RAID x NV SATA 2 Secondary RAID x NV SATA 3 Primary RAID x NV SATA 3 Secondary RAID [Disabled] Enabled Enabled Enabled Enabled Enabled Enabled Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults NV SATA RAID function Enabled Disabled Enable NV SATA RAID function. Disable NV SATA RAID function. (Default value) NV SATA 1 Primary RAID Enabled Enable NV SATA 1 primary RAID function. Disabled Disable this function. (Default value) NV SATA 1 Secondary RAID Enabled Enable NV SATA 1 secondary RAID function. Disabled Disable this function. (Default value) NV SATA 2 Primary RAID Enabled Enable NV SATA 2 primary RAID function. Disabled Disable this function. (Default value) NV SATA 2 Secondary RAID Enabled Disabled Enable NV SATA 2 secondary RAID function. Disable this function. (Default value) GA-N680SLI-DQ6 Motherboard - 44 -