Gigabyte GA-N680SLI-DQ6 Manual - Page 47

English Onboard LAN1 Controller (The upper LAN connector of the back panel Dual LAN connectors) Enabled Enable onboard LAN1 controller function. (Default value) Disabled Disable onboard LAN1 controller function. Onboard LAN2 Controller (The lower LAN connector of the back panel Dual LAN connectors) Enabled Enable onboard LAN2 controller function. (Default value) Disabled Disable onboard LAN2 controller function. Onboard LAN Boot ROM This function decide whether to invoke the boot ROM of the onboard LAN chip. Enabled Enable this function. Disabled Disable this function. (Default value) Onboard Audio Function Auto Disabled Auto-detect onboard audio function. (Default value) Disable this function. On-Chip USB V1.1+V2.0 Enable the USB 1.1 and USB 2.0 controllers. (Default value) V1.1 Disabled Enable only the USB 1.1 controller. Disable the onboard USB controller. USB Keyboard Support Enabled Disabled Enable USB keyboard support. Disable USB keyboard support. (Default value) USB Mouse Support Enabled Enable USB mouse support. Disabled Disable USB mouse support. (Default value) Onboard 1394 Enabled Enable onboard IEEE 1394 function. (Default value) Disabled Disable this function. Legacy USB storage detect This option allows users to decide whether to detect USB storage devices, including USB flash drives and USB hard drives during POST. Enabled Disabled BIOS will scan all USB storage devices. (Default value) Disable this function. Onboard Serial Port 1 Auto 3F8/IRQ4 BIOS will automatically setup the port 1 address. Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) 2F8/IRQ3 3E8/IRQ4 Enable onboard Serial port 1 and address is 2F8/IRQ3. Enable onboard Serial port 1 and address is 3E8/IRQ4. 2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3. Disabled Disable onboard Serial port 1. - 47 - BIOS Setup