Gigabyte GA-N680SLI-DQ6 Manual - Page 49

English 2-4 Power Management Setup CMOS Setup Utility-Copyright (C) 1984-2007 Award Software Power Management Setup ACPI Suspend Type Soft-Off by Power button PME Event Wake Up Modem Ring On USB Resume from Suspend Power-On by Alarm x Day of Month Alarm x Time (hh:mm:ss) Alarm HPET Support (Note) Power On By Mouse Power On By Keyboard x KB Power ON Password AC Back Function [S1(POS)] [Instant-Off] [Enabled] [Enabled] [Disabled] [Disabled] Everyday 0 : 0 : 0 [Enabled] [Disabled] [Disabled] Enter [Soft-Off] Item Help Menu Level : Move Enter: Select F5: Previous Values +/-/PU/PD: Value F10: Save F6: Fail-Safe Defaults ESC: Exit F1: General Help F7: Optimized Defaults ACPI Suspend Type S1(POS) Set ACPI suspend type to S1/POS(Power On Suspend). (Default value) S3(STR) Set ACPI suspend type to S3/STR(Suspend To RAM). Soft-Off by Power button Instant-Off Press power button then Power off instantly. (Default value) Delay 4 Sec. Press power button 4 seconds to Power off. Enter suspend if button is pressed less than 4 seconds. PME Event Wake Up Disabled Disable this function. Enabled Enable PME Event Wake up. (Default value) Modem Ring On An incoming call via modem can awake the system from any suspend state. Disabled Disable this function. Enabled Enable Modem Ring On function. (Default value) USB Resume from Suspend Disabled Disable this function. (Default value) Enabled Enable USB device wake up system from suspend mode. Power-On by Alarm You can enable the "Power-On by Alarm" item and key in Date/Time to power on system. Disabled Disable this function. (Default value) Enabled Enable alarm function to POWER ON system. If Power-On by Alarm is Enabled. Day of Month Alarm : Everyday, 1~31 Time (hh: mm: ss) Alarm : (0~23) : (0~59) : (0~59) (Note) Supported on Vista operating system only. - 49 - BIOS Setup