Gigabyte MNNM1PI Manual - Page 28
LBA/Large Mode, Block Multi-Sector Transfer, PIO Mode, DMA Mode, S.M.A.R.T Mode
View all Gigabyte MNNM1PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
MNNM1PI Motherboard Auto: Set parameters automatically. (Default setting) CD-ROM: Use for ATAPI CD-ROM drives or double click [Auto] to set all HDD parameters automatically. ARMD: Use ARMD drive is installed here. LBA/Large Mode Configure the device type in the specific IDE channel support LBA Mode. Disabled: Disable LBA/Large Mode. Auto: Auto configuration. (Default setting) Block (Multi-Sector Transfer) Configure the information of Multi-Sector Transfer Mode. Disabled: The data transfer from and to the device occurs one sector at a time. Auto: The data transfer from and to the device occurs multiple sectors at a time if the device supports it. (Default setting) PIO Mode This feature allows you to set the PIO (Programmed Input/Output) mode for the two IDE devices (Master and Slave drives) attached to that particular IDE channel. Disabled: Disable PIO Mode. Auto: Auto configuration. (Default setting) DMA Mode Configure the DMA mode of the device in the specific IDE channel. Auto: Auto configuration. (Default setting) S.M.A.R.T Mode This option enables/disables support for the hard disk's S.M.A.R.T. capability. The S.M.A.R.T. (Self Monitoring Analysis And Reporting) technology is supported by all current hard disks and it allows the early prediction and warning of impending hard disk disasters. Enabled: Enable S.M.A.R.T Mode. Disabled: Disable S.M.A.R.T Mode. Auto: Auto configuration. (Default setting) 28