Gigabyte MNNM1PI Manual - Page 36

ACPI Configuration BIOS SETUP UTILITY Main Advanced PCIPnP Boot Security Chipset Exit ACPI Settings Suspend Mode ACPI Version Features ACPI APIC support Resume On RTC Alarm epost Video on S3 Resume [Auto] [ACPI v3.0] [Enabled] [Disabled] [No] MNNM1PI Motherboard  Select Screen   Select Item +- Change Field Tab Select Field F1 General Help F10 Save and Exit ESC Exit v02.61 (C) Copyright 1985-2006, American Megatrends, Inc. Suspend Mode S1 (POS) Enables the system to enter the ACPI S1 (Power on Suspend) sleep state. In S1 sleep state, the system appears suspended and stays in a low power mode. The system can be resumed at any time. S3 (STR) Enables the system to enter the ACPI S3 (Suspend to RAM) sleep state In S3 sleep state, the system appears to be off and consumes less power than in the S1 state. When signaled by a wake-up device or event, the system resumes to its working state exactly where it was left off. Auto Auto configuration. (default setting) ACPI Version Features Configure ACPI version features. Options available: ACPI v1.0, ACPI v2.0, and ACPI v3.0. Default setting is ACPI v3.0. ACPIAPIC Support Enabled Enable ACPI APICsupport. (Default setting) Disabled Disable ACPI APICsupport. 36