Gigabyte MNNM1PI Manual - Page 31
Parallel Port Address, Paralle Port, Mode DMA Channel, Paralle Port IRQ, Serial Port 3/4 Address
View all Gigabyte MNNM1PI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
MNNM1PI Motherboard Parallel Port Address 378 Enable parallel port and set IO address to 378. (Default setting) 278 Enable parallel port and set IO address to 278. 3BC Enable parallel port and set IO address to 3BC. Disabled Disable parallel port. Paralle Port Mode This function allows you to select the the onboard parallel port transfer mode. Normal Normal operation.(Default setting) EPP Enhanced Parallel Port ECP Extended Capabilities Port. ECP+EPP Both Enhanced Parallel Port and Extended Capabilities Port. ECP Mode DMA Channel This option is only available if the setting for the Parallel Port Mode option is ECP and EPP+ECP. This option sets the DMA channel used by parallel port. Options DMA0, DMA1, DMA3. Default setting is DMA3. NOTE!! This item will pops up when Parallel Port Mode is set to ECP and EPP+ECP. Paralle Port IRQ IRQ7 Set IO address to IRQ7. (Default setting) IRQ5 Set IO address to IRQ5. Eup Lot6 EuP Lot 6 is a standard for reduced power consumption in idle mode. Disabled Disable Eup Lot6 function.(Default setting) Enabled Enable Eup Lot6 function. Serial Port 3/4 Address 2F8 Enable serial port1 and set IO address to 2F8. 2E8 Enable serial port1 and set IO address to 2E8. (Default setting for Serial Port 3) 2E0 Enable serial port1 and set IO address to 2E0. (Default setting for Serial Port 4) 31