HTC Touch CDMA Touch Sprint SMS Timestamp Hotfix - Page 151
Resetting Your Device
View all HTC Touch CDMA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
12.3 Resetting Your Device Soft Reset Occasionally you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. To perform a soft reset: Use the stylus to lightly press and hold the RESET button on the bottom of your device. The device restarts, and then displays the Today screen. RESET button Hard Reset You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other preinstalled programs will remain. To perform a hard reset: 1. Press and hold the Talk Key and End Key, and at the same time, use the stylus to press the RESET button at the bottom of your device. 2. Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen: This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press ENTER to restore manufacturer defaults, or press Camera button to cancel. 3. Release the Talk Key and End Key, and then press the ENTER button on your device. Note: Your device will be set back to factory default settings. Please ensure any additional installed programs and user data have been backed up before a hard reset is performed. Clear Storage Another way to clear the device storage and reset all settings back to factory default settings is to use the Clear Storage feature. You will lose all your data and files on the device storage when you use Clear Storage, so make sure to do a backup first. 1. Tap Start > Settings > System tab > Clear Storage. 2. Enter "1234" and then tap Yes. Section 12: Managing Your Device 145