Haier HMV1630DBWW HMV1630 Installation Guide - Page 11

Determining Wall Plate Location Under Your, Cabinet.

Get Haier HMV1630DBWW PDF manuals and user guides View all Haier HMV1630DBWW manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

English C. DETERMINING WALL PLATE LOCATION UNDER YOUR CABINET. PLATE POSITION-BENEATH FLAT BOTTOM CABINET PLATE POSITION-BENEATH FRAMED RECESSED CABINET BOTTOM Mounting Plate Tabs Touching the Cabinet Bottom Mounting Plate Tabs Touching the Back Frame At least 30ʺ (76.2 cm), up to 36ʺ (91.4 cm) PLATE POSITION-BENEATH RECESSED BOTTOM CABINET WITH FRONT OVERHANG Mounting Plate with Tabs Below Cabinet Bottom the Same Distance as the Front Overhang Depth 30ʺ (76.2 cm) to Cooktop 30ʺ (76.2 cm) to Cooktop Your cabinets may have decorative trim that interferes with the microwave installation. Remove the decorative trim to install the microwave properly and to make it level. THE MICROWAVE MUST BE LEVEL. Use a level to make sure the cabinet bottom is level. If the cabinets have a front overhang only, with no back or side frame, install the mounting plate down the same distance as the front overhang depth. This will keep the microwave level. 1. Measure the inside depth of the front overhang. 2. Draw a horizontal line on the back wall an equal distance below the cabinet bottom as the inside depth of the front overhang. 3. For this type of installation with front overhang only, align the mounting tabs with this horizontal line, not touching the cabinet bottom as described in Step D. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
10
English
C.
DETERMINING WALL PLATE LOCATION UNDER YOUR
CABINET.
PLATE POSITION—BENEATH FLAT BOTTOM
CABINET
PLATE POSITION—BENEATH RECESSED
BOTTOM CABINET WITH FRONT OVERHANG
PLATE POSITION—BENEATH FRAMED RECESSED
CABINET BOTTOM
Mounting Plate Tabs
Touching the Cabinet Bottom
At least 30
ʺ
(76.2 cm),
up to 36
ʺ
(91.4 cm)
30
ʺ
(76.2 cm)
to Cooktop
Mounting Plate Tabs
Touching the Back Frame
Mounting Plate with
Tabs Below Cabinet
Bottom the Same
Distance as the Front
Overhang Depth
30
ʺ
(76.2 cm)
to Cooktop
Your cabinets may have decorative trim that interferes with the microwave installation.
Remove the decorative trim to install the microwave properly and to make it level.
THE MICROWAVE MUST BE LEVEL.
Use a level to make sure the cabinet bottom is level.
If the cabinets have a front overhang only, with no back or side frame, install the
mounting plate down the same distance as the front overhang depth. This will keep
the microwave level.
Measure the inside depth of the
1.
front overhang.
Draw a horizontal line on the back wall an equal distance below the cabinet
2.
bottom as the inside depth of the front overhang.
For this type of installation with front overhang only, align the mounting tabs with
3.
this horizontal line, not touching the cabinet bottom as described in Step D.