Haier HMV1630DBWW HMV1630 Installation Guide - Page 16
A3. Adapting Microwave Blower For Outside, Top Exhaust, A4. Check For Proper Damper Operation, A5. - installation guide
View all Haier HMV1630DBWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Engglliisshh A3. ADAPTING MICROWAVE BLOWER FOR OUTSIDE TOP EXHAUST 4. Place the blower unit back into the AFTER: Fan Blade Openings Facing Top opening. 5. Secure blower unit to microwave with the screw removed in Step 1. Make sure the screw is tight. Back of Microwave 6. Replace blower plate with the screw removed in Step 1. Make sure the screw is tight. Back of Microwave 7. Attach the exhaust adaptor to the top of the blower plate by sliding it into the guides of the blower plate. Push in securely until it is in the locking tabs. Take care to assure that the damper hinge is installed so that the damper swings freely. Adaptor Guide Back of Microwave Locking Tab A4. CHECK FOR PROPER DAMPER OPERATION t.BLFTVSFUBQFTFDVSJOHEBNQFSJT removed and damper pivots easily before mounting microwave. Blower Plate Exhaust Adaptor t:PVXJMMOFFEUPNBLFBEKVTUNFOUT to assure proper alignment with your house exhaust duct after the microwave is installed. A5. MOUNT THE MICROWAVE OVEN Damper Back of Microwave FOR EASIER INSTALLATION AND PERSONAL SAFETY, WE RECOMMEND THAT TWO PEOPLE INSTALL THIS MICROWAVE OVEN. IMPORTANT: Do not grip or use handle during installation. NOTE: If your cabinet is metal, use the nylon grommet around the power cord hole to prevent cutting of the cord. NOTE: We recommend using filler blocks if the cabinet front hangs below the cabinet bottom shelf. IMPORTANT: If filler blocks are not used, case damage may occur from overtightening screws. 15