Harbor Freight Tools 62779 User Manual - Page 45
Service Precautions, Operating Precautions cont.
![]() |
View all Harbor Freight Tools 62779 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Safety Setup Operating Precautions (cont.) 20. Parts, especially exhaust system components, get very hot during use. Stay clear of hot parts. 21. Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling. 22. Do not cover the engine or equipment during operation. 23. Keep the equipment, engine, and surrounding area clean at all times. 24. Use the equipment, accessories, etc., in accordance with these instructions and in the manner intended for the particular type of equipment, taking into account the working conditions and the work to be performed. Use of the equipment for operations different from those intended could result in a hazardous situation. 25. Do not operate the equipment with known leaks in the engine's fuel system. 26. This product contains or, when used, produces a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. (California Health & Safety Code § 25249.5, et seq.) 27. When spills of fuel or oil occur, they must be cleaned up immediately. Dispose of fluids and cleaning materials as per any local, state, or federal codes and regulations. Store oil rags in a bottom-ventilated, covered, metal container. 28. Keep hands and feet away from moving parts. Do not reach over or across equipment while operating. 29. Before use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the equipment's operation. If damaged, have the equipment serviced before using. Many accidents are caused by poorly maintained equipment. 30. Use the correct equipment for the application. Do not modify the equipment and do not use the equipment for a purpose for which it is not intended. Service Precautions 1. Before service, maintenance, or cleaning: a. Turn the engine switch to its "OFF" position. b. Allow the engine to completely cool. c. Then, remove the spark plug cap from the spark plug. 2. Keep all safety guards in place and in proper working order. Safety guards include muffler, air cleaner, mechanical guards, and heat shields, among other guards. 3. Do not alter or adjust any part of the equipment or its engine that is sealed by the manufacturer or distributor. Only a qualified service technician may adjust parts that may increase or decrease governed engine speed. 4. Wear ANSI-approved safety goggles, heavy-duty work gloves, and dust mask/respirator during service. 5. Maintain labels and nameplates on the equipment. These carry important information. If unreadable or missing, contact Harbor Freight Tools for a replacement. 6. Have the equipment serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the equipment is maintained. Do not attempt any service or maintenance procedures not explained in this manual or any procedures that you are uncertain about your ability to perform safely or correctly. 7. Store equipment out of the reach of children. 8. Follow scheduled engine and equipment maintenance. Refueling: 1. Do not refill the fuel tank while the engine is running or hot. 2. Do not smoke, or allow sparks, flames, or other sources of ignition around the equipment, especially when refuelling. 3. Do not fill fuel tank to the top. Leave a little room for the fuel to expand as needed. 4. Refuel in a well-ventilated area only. 5. Wipe up any spilled fuel and allow excess to evaporate before starting engine. To prevent FIRE, do not start the engine while the smell of fuel hangs in the air. SAVE THESE INSTRUCTIONS. Operation Maintenance Engine for ITEM 62779 For technical questions, please call 1-888-866-5797. Page 5
![](/manual_guide/products/harbor-freight-tools-62779-user-manual-d6fd3f6/45.png)