HP 2175 HP PSC 2170 series all-in-one - (English) Reference Guide - Page 54

connect your hppsc to your computer, connect your usb port, remove and reinstall your hppsc software - installation software

Page 54 highlights

chapter 8 connect your hp psc to your computer Your HP PSC supports HOT Swapping, meaning you can connect to the HP PSC while the power is on at your computer and on the HP PSC. Note: HP recommends that you install the HP PSC software before attempting to HOT Swap your HP PSC. connect your usb port Connecting your computer to your HP PSC with USB is straightforward. Simply plug one end of the USB cable into the back of your computer and the other in the back of the HP PSC. Note: HP recommends a USB cable of 3m or less. what works what does not work Plugging into the USB port on your Plugging into the USB port located computer on the keyboard Plugging into a powered hub that is Plugging into a non-powered USB connected to the USB port on your hub computer Note: AppleTalk is not supported. connecting to the USB port on your computer connect your hp psc to more than one computer You can connect more than one computer to your HP PSC by using a powered hub. Both computers must have the HP PSC software installed. Connect each computer to the hub, then connect the hub to the HP PSC. remove and reinstall your hp psc software Do not simply delete the HP PSC program files from your hard drive. Be sure to remove them properly using the uninstall utility provided in the HP PSC program group. 48 hp psc 2170 series

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80

hp psc 2170 series
chapter 8
48
connect your hp psc to your computer
Your HP PSC supports HOT Swapping, meaning you can connect to the HP PSC
while the power is on at your computer and on the HP PSC.
Note:
HP recommends that you install the HP PSC software before
attempting to HOT Swap your HP PSC.
connect your usb port
Connecting your computer to your HP PSC with USB is straightforward. Simply
plug one end of the USB cable into the back of your computer and the other in
the back of the HP PSC.
Note:
HP recommends a USB cable of 3m or less.
Note:
AppleTalk is not supported.
connecting to the USB port on your computer
connect your hp psc to more than one computer
You can connect more than one computer to your HP PSC by using a powered
hub. Both computers must have the HP PSC software installed. Connect each
computer to the hub, then connect the hub to the HP PSC.
remove and reinstall your hp psc software
Do
not
simply delete the HP PSC program files from your hard drive. Be sure to
remove them properly using the uninstall utility provided in the HP PSC program
group.
what works
what does not work
Plugging into the USB port on your
computer
Plugging into the USB port located
on the keyboard
Plugging into a powered hub that is
connected to the USB port on your
computer
Plugging into a non-powered USB
hub