HP 2500c HP 2500C/C+/CM Professional Series Color Printer - (English) Network - Page 16

Step 3 - Copy Printer Software to a Network Drive for Client Installation

Get HP 2500c - Pro Printer PDF manuals and user guides View all HP 2500c manuals
Add to My Manuals
Save this manual to your list of manuals

Page 16 highlights

6.4 Configuring the JetDirect Print Server Port to Connect to the NetWare 4.11 Bindery Network This procedure allows you set up the HP JetDirect port on the NetWare 4.11 Bindery Network. Step 1 - Install HP JetAdmin 1. Insert the HP JetDirect CD-ROM into the CD-ROM drive. If the installation program does not run automatically, access the File Manager or Explorer and run SETUP.EXE that is on the CD-ROM. 2. Select the option to install JetAdmin and follow the instructions on the screen. Step 2 - Configure the JetDirect Print Server 1. Log onto the network with Supervisor privileges at any user workstation that has the HP JetAdmin installed. 2. Click Start, Programs, HP JetAdmin Utlities, and HP JetAdmin, to run HP JetAdmin. 3. The following message may appear: "JetAdmin could not find any configured devices on your network. Do you want to configure one now?". Click Yes and proceed to 5. If this message is not displayed, go to 4. 4. On the HP JetAdmin Utility screen, press [F5] to refresh the list of printers. All configured print servers are displayed. 5. Select Device, New. On the New Device screen, highlight the LAN hardware address of your print server. (The 12-character hardware address is on the HP JetDirect configuration page.) 6. Click Configure. A General screen appears. 7. Type the name of the print server and a description (optional): then click Next. A NetWare configuration screen appears. 8. Click Operating Mode and select Queue Server Mode. 9. Click Queues and then click Change. 10. Select your NetWare server from the list and click Create. 11. Type a name for this printer queue in the Create Queue screen and click OK. 12. Click Yes to add the queue to the list of serviced queues. 13. The configured queues appears under Serviced Queues, click OK. 14. Follow the instructions to complete configuration. Step 3 - Copy Printer Software to a Network Drive for Client Installation Please refer to section 6.2 for the procedure on installing the HP 2500C Series Printer Software. 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
13
6.4 Configuring the JetDirect Print Server Port to Connect to the
NetWare 4.11 Bindery
Network
This procedure allows you set up
the HP JetDirect port on the NetWare 4.11 Bindery Network.
Step 1 - Install HP JetAdmin
1.
Insert the HP JetDirect CD-ROM into the CD-ROM drive.
If the installation program
does not run automatically, access the File Manager or Explorer and run SETUP.EXE
that is on the CD-ROM.
2.
Select the option to install JetAdmin and follow the instructions on the screen.
Step 2 - Configure the JetDirect Print Server
1.
Log onto the network with Supervisor privileges at any user workstation that has
the HP JetAdmin installed.
2.
Click
Start, Programs, HP JetAdmin Utlities
, and
HP JetAdmin
, to run HP
JetAdmin.
3.
The following message may appear: "JetAdmin could not find any configured
devices on your network. Do you want to configure one now?". Click
Yes
and
proceed to 5. If this message is not displayed, go to 4.
4.
On the HP JetAdmin Utility screen, press [F5] to refresh the list of printers. All
configured print servers are displayed.
5.
Select
Device
,
New
. On the New Device screen, highlight the LAN hardware address
of your print server. (The 12-character hardware address is on the HP JetDirect
configuration page.)
6.
Click
Configure
. A General screen appears.
7.
Type the name of the print server and a description (optional): then click
Next
. A
NetWare configuration screen appears.
8.
Click
Operating Mode
and select
Queue Server Mode
.
9.
Click
Queues
and then click
Change
.
10. Select your NetWare server from the list and click
Create
.
11.
Type a name for this printer queue in the Create Queue screen and click
OK
.
12. Click
Yes
to add the queue to the list of serviced queues.
13.
The configured queues appears under Serviced Queues, click
OK
.
14. Follow the instructions to complete configuration.
Step 3 - Copy Printer Software to a Network Drive for Client Installation
Please refer to section 6.2 for the procedure on installing the HP 2500C Series Printer
Software.