HP 285 Maintenance and Service Guide - Page 28
Front bezel security
![]() |
View all HP 285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Front bezel security The front bezel can be secured in place by installing a screw through the front of the chassis into the front bezel. 1. Prepare the computer for disassembly (Preparation for disassembly on page 17) 2. Remove the access panel (Access panel on page 18) 3. Install a 6-32 screw through the front of the chassis and into the screw hole located below the center bezel release tab. 4. Replace the computer access panel. 5. Reconnect the power cord and any external devices, and then turn on the computer. 6. Lock any security devices that were disengaged when the access panel was removed. 20 Chapter 4 Removal and replacement procedures - Microtower (MT) chassis
![](/manual_guide/products/hewlettpackard-285-maintenance-service-guide-8bafa55/28.png)
Front bezel security
The front bezel can be secured in place by installing a screw through the front of the chassis into the front
bezel.
1.
Prepare the computer for disassembly (
Preparation for disassembly
on page
17
)
2.
Remove the access panel (
Access panel
on page
18
)
3.
Install a 6-32 screw through the front of the chassis and into the screw hole located below the center
bezel release tab.
4.
Replace the computer access panel.
5.
Reconnect the power cord and any external devices, and then turn on the computer.
6.
Lock any security devices that were disengaged when the access panel was removed.
20
Chapter 4
Removal and replacement procedures – Microtower (MT) chassis