HP 285 Maintenance and Service Guide - Page 36
Drives, package Fragile: Handle With Care.
View all HP 285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Drives Description Hard drives/Solid-state drives 2-TB, 7200-rpm 1-TB, 7200-rpm 500-GB, 7200-rpm 256 GB Solid-state Drive (SSD), 2.5 inch (HP 280 G2 models only) 128 GB Solid-state Drive (SSD), 2.5 inch (HP 280 G2 models only) Grommet, hard drive isolation, blue Optical drives DVD±RW drive DVD-ROM drive When installing drives, follow these guidelines: ● The primary Serial ATA (SATA) hard drive must be connected to the dark blue primary SATA connector on the system board labeled SATA0. ● Connect secondary hard drives and optical drives to one of the remaining SATA connectors on the system board (labeled SATA1 and SATA2). CAUTION: To prevent loss of work and damage to the computer or drive: If you are inserting or removing a drive, shut down the operating system properly, turn off the computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby mode. Before handling a drive, ensure that you are discharged of static electricity. While handling a drive, avoid touching the connector. For more information about preventing electrostatic damage, refer to Electrostatic discharge information on page 9. Handle a drive carefully; do not drop it. Do not use excessive force when inserting a drive. Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields such as monitors or speakers. If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and label the package "Fragile: Handle With Care." 28 Chapter 4 Removal and replacement procedures - Microtower (MT) chassis