HP 285 Maintenance and Service Guide - Page 53
Processor for use in HP 280 G2 models (Intel)
View all HP 285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Processor for use in HP 280 G2 models (Intel) Description Intel Core i7-6700, 3.4 GHz Intel Core i5-6600, 3.3 GHz Intel Core i5-6500, 3.2 GHz Intel Core i3-6320, 3.9 GHz Intel Core i3-6300, 3.8 GHz Intel Core i3-6100, 3.7 GHz Description Intel Pentium G4520, 3.6 GHz Intel Pentium G4500, 3.5 GHz Intel Pentium G4400, 3.3 GHz Intel Celeron G3920, 2.9 GHz Intel Celeron G3900, 2.8 GHz 1. Prepare the computer for disassembly (Preparation for disassembly on page 17). 2. Remove the access panel (Access panel on page 18). 3. Remove the fan sink (Fan sink on page 44). 4. Rotate the locking lever to its full open position (1). 5. Raise and rotate the microprocessor retainer to its fully open position (2). 6. Lift the processor (3) straight up and remove it. CAUTION: Do NOT handle the pins in the processor socket. These pins are very fragile and handling them could cause irreparable damage. Once pins are damaged it may be necessary to replace the system board. Reverse the removal procedure to install a new processor. NOTE: After installing a new processor onto the system board, update the system ROM to ensure that the latest version of the BIOS is being used on the computer. The latest system BIOS can be found on the Web at: http://h18000.www1.hp.com/support/files. Processor for use in HP 280 G2 models (Intel) 45