HP 285 Maintenance and Service Guide - Page 32
Lock any security devices that were disengaged when the access panel was removed.
View all HP 285 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
4. Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3). 5. Repeat steps 3 and 4 to install any additional modules. 6. Replace the computer access panel. 7. Reconnect the power cord and turn on the computer. 8. Lock any security devices that were disengaged when the access panel was removed. The computer should automatically recognize the additional memory the next time you turn on the computer. 24 Chapter 4 Removal and replacement procedures - Microtower (MT) chassis
4.
Push the module down into the socket, ensuring that the module is fully inserted and properly seated.
Make sure the latches are in the closed position
(3)
.
5.
Repeat steps 3 and 4 to install any additional modules.
6.
Replace the computer access panel.
7.
Reconnect the power cord and turn on the computer.
8.
Lock any security devices that were disengaged when the access panel was removed.
The computer should automatically recognize the additional memory the next time you turn on the computer.
24
Chapter 4
Removal and replacement procedures – Microtower (MT) chassis