HP 3330mfp HP LaserJet 3300mfp Series - (English) Getting Started Guide - Page 17

1 2 3 4 5 ENWW To install a print cartridge To install a print cartridge, use the following steps: CAUTION To prevent damage to the print cartridge, do not expose it to light for more than a few minutes. 1 Make sure the print cartridge door is open. 2 Remove the print cartridge from its packaging, and locate the sealing tape at the end of the cartridge. 3 To remove the sealing tape from the cartridge, grasp the tape and pull it straight out from the cartridge. Avoid touching any black toner on the tape. 4 Insert the cartridge as shown, with the arrows pointing into the product. 5 Close the print cartridge door. The print cartridge engages when the door is closed. Note If toner gets on your clothing or other fabric, wipe off the toner with a dry cloth. Wash the items in cold water and air dry. CAUTION Hot water or heat from a dryer can set toner into fabric. Hewlett-Packard Company cannot recommend the use of non-HP print cartridges, either new, refilled, or remanufactured. Since they are not HP products, HP cannot influence their design or control their quality. Assembling your product 13