HP 3330mfp HP LaserJet 3300mfp Series - (English) Getting Started Guide - Page 19
To install the ADF input tray, To connect the power cord, 110V product
UPC - 088698451328
View all HP 3330mfp manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
To install the ADF input tray If your product has an automatic document feeder (ADF), use the following steps to install the ADF input tray: 1 Align the two tabs on the input tray with the two grooves in the ADF lid. 2 Slide the tray into the grooves as shown until the tray snaps into place. Note ENWW To connect the power cord To connect your product to a power source, use the following steps. 1 If you have the 220V product, locate the power switch on the back of the product and make sure the product is switched off. 2 Connect the power cord to the product, as shown (1). 3 Plug the other end of the power cord directly into a grounded AC outlet (2). 1 2 4 If you have the 220V product, switch on the power. If you have the 110V product, there is no power switch. It will automatically power on when it is plugged in. HP does not recommend the use of uninterrupted power supply (UPS) battery backup devices or surge suppressors with this product. Many surge suppressors and battery backups can cause print defects. Assembling your product 15