HP 350546-B21 HP StorageWorks Ultrium Tape Drive Removable Model Getting Start - Page 41

The drive does not work, Cartridge-related problems, If the self-test fails see LEDs during self

Get HP 350546-B21 - StorageWorks Rack-Mount Kit Ultrium 460 Drive Tape PDF manuals and user guides
UPC - 808736773836
View all HP 350546-B21 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 41 highlights

The drive does not work Possible reason If the drive does not power up (all LEDs are off), the power cable may not be connected to the drive properly. If the self-test fails (see "LEDs during selftest" on page 40), there may be a hardware or firmware failure. Recommended action heck the power cable connection and replace the cable if necessary. You can use the power cable from your monitor or another device to check that the connection is working. If the power supply is present and all LEDs remain off, call for assistance. If there is a cartridge in the drive, remove it. Reset or power down the drive and power it up again. If the self-test still fails, call for assistance. Cartridge-related problems Please see "Problems with cartridges" on page 44. 39

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
39
The drive does not work
Cartridge-related problems
Please see “Problems with cartridges” on page 44.
Possible reason
Recommended action
If the drive does not power up (all LEDs
are off), the power cable may not be
connected to the drive properly.
heck the power cable connection and replace the
cable if necessary. You can use the power cable
from your monitor or another device to check that
the connection is working. If the power supply is
present and all LEDs remain off, call for
assistance.
If the self-test fails (see “LEDs during self-
test” on page 40), there may be a
hardware or firmware failure.
If there is a cartridge in the drive, remove it. Reset
or power down the drive and power it up again.
If the self-test still fails, call for assistance.