HP 4020 HP Designjet 4020 Printer series - Assembly Instructions: English - Page 13
extract the other end 2.
 |
UPC - 884420909606
View all HP 4020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
93 94 95 96 Insert the other seven printhead cleaners into the correct slots. Close the printhead cleaner door. 97 98 Wait until you see this front panel message. Press the Select key. Lower the spindle lever. 99 100 Remove the right-hand end of the spindle (1) from the printer, then move it to the right in order to extract the other end (2). Remove the blue-colored stop (1) from the left-hand end of the spindle. Keep the spindle horizontal. Slide a roll of paper onto the spindle. Make sure the paper is oriented exactly as shown. Put the blue-colored stop onto the spindle and push it on as far as it will go without using excessive force.
-
1 -
2
-
3
-
4
-
5
-
6
-
7
-
8 -
9 -
10 -
11 -
12 -
13 -
14 -
15 -
16 -
17 -
18
 |
 |
93
94
95
96
Lower the spindle lever.
Insert the other seven printhead cleaners into the
correct slots.
Close the printhead cleaner door.
Wait until you see this front panel message.
Press the Select key.
97
98
99
100
Put the blue-colored stop onto the spindle and
push it on as far as it will go without using
excessive force.
Remove the right-hand end of the spindle (1) from
the printer, then move it to the right in order to
extract the other end (2).
Remove the blue-colored stop (1) from the
left-hand end of the spindle. Keep the spindle
horizontal.
Slide a roll of paper onto the spindle. Make sure
the paper is oriented exactly as shown.