HP 4020 HP Designjet 4020 Printer series - Assembly Instructions: English - Page 16

117 118 119 120 You should see the front panel message above. Using the stops, carefully wind the excess paper back on to the spindle. Lower the printer window. You should see the front panel message above. 121 122 123 PC/Mac/Workstation 124 Using the stops, carefully wind the excess paper back on to the spindle. The printer will automatically perform printhead alignment and a color calibration for the paper type that you have inserted. During this process the printer will advance the paper up to 3 m (~10 ft) before printing. Please do not try to stop the paper advance; it is necessary to ensure a successful printhead alignment. The whole alignment and calibration process will take about twenty minutes; while it is going on, you can proceed to the next section. Printer Server PC/Mac/Workstation Your printer can be connected to a computer directly or to one or more computers via a network. Locate the area at the back of the printer where you can connect the printer to your computer or network, or install an optional accessory.