HP 4020 HP Designjet 4020 and 4520 Printer Series - User's Guide: English - Page 29

Printer operation Request E-mail notification of specific error conditions 1. In the Embedded Web Server, go to the E-mail server page, which you can find in the Settings tab, and ensure that the following fields are correctly filled in: ● SMTP server: the IP address of the outgoing mail server (SMTP) that will process all E-mail messages from the printer. If the mail server requires authentication, E-mail notifications will not work. ● Printer E-mail address: each E-mail message sent by the printer must include a return address, which does not need to be a real, functional E-mail address, but it should be unique, so that recipients of the message can identify the printer that sent it. 2. Go to the Notification page, which is also in the Settings tab. 3. Click New to request new notifications (or Edit to edit notifications that have already been set up). Then fill in the E-mail addresses to which notifications should be sent, and select the incidents that should result in notification messages. Initially the most commonly-specified incidents are shown; to see all the possibilities, click Show all alerts. Set the date and time The printer's date and time settings are mainly useful in job accounting (see Request accounting data by E-mail on page 108). These settings can be changed using the Embedded Web Server or the printer's front panel. ● In the Embedded Web Server, go to the Settings tab and select Configuration, then Date & Time. ● At the front panel, select the icon, then Printer configuration > Date and time options > Set date or Set time or Set time zone. If you are using the HP Designjet 4020 Printer series, and you find that these options are not available, please download the latest firmware revision (see Update my printer's firmware on page 116). Change the sleep mode setting If the printer is left switched on but unused for a certain period of time, it will go automatically into sleep mode to save power. To change the time the printer waits before it goes into sleep mode, go to the front panel and select the icon, then Printer configuration > Sleep mode wait time. Highlight the wait time you want, then press the Select key. Turn off the buzzer To turn the printer's buzzer on or off, go to the front panel and select the configuration > Front panel options > Enable buzzer. icon, then Printer Change the front panel contrast To change the contrast of the front panel display, select the icon, then Printer configuration > Front panel options > Select display contrast, and choose a value using the Up or Down key. Press the Select key to set the value you have chosen. ENWW Request E-mail notification of specific error conditions 19