HP 6125XLG HP 6125XLG Blade Switch Installation Guide - Page 11
Connect using, Bits per second, Data bits, Parity, Stop bits, Flow control, Restore Defaults
View all HP 6125XLG manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Figure 7 Connection description 3. Select the serial port to be used from the Connect using list, and click OK. Figure 8 Setting the serial port used by the HyperTerminal connection 4. Set Bits per second to 9600, Data bits to 8, Parity to None, Stop bits to 1, and Flow control to None, and click OK, or click Restore Defaults. 7
7
Figure 7
Connection description
3.
Select the serial port to be used from the
Connect using
list, and click
OK
.
Figure 8
Setting the serial port used by the HyperTerminal connection
4.
Set
Bits per second
to
9600
,
Data bits
to
8
,
Parity
to
None
,
Stop bits
to
1
, and
Flow control
to
None
,
and click
OK
, or click
Restore Defaults
.