HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 199
CVLM System Messages
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 199 highlights
Chapter CVLM System Messages 20 CVLM-1001 Message , [CVLM-1001], ,, ERROR, , Failed to allocate memory: . Probable Cause Indicates that the specified function has failed to allocate memory. Recommended Check the memory usage on the switch using the memShow command. Restart or power cycle the Action switch. Severity ERROR CVLM-1002 Message , [CVLM-1002], ,, ERROR, , Failed to initialize rc = . Probable Cause Indicates that an initialization of a module within the CVLMD has failed. Recommended Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for more information on this command. Severity ERROR CVLM-1003 Message , [CVLM-1003], ,, INFO, , Crypto device configuration has been committed by switch . Probable Cause Indicates that the switch has committed a crypto device configuration. Recommended No action is required. Action Severity INFO CVLM-1004 Message , [CVLM-1004], ,, WARNING, , Crypto device configuration between local switch and peer is out of sync. New encryption session is not allowed. Fabric OS Message Reference 129 53-1001338-01