HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 376
FW-1200, FW-1201, FW-1202
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 376 highlights
42 FW-1200 Probable Cause Indicates that the number of link resets that the port experiences has changed from a value outside of the acceptable range to a value within the acceptable range. Link resets occur due to link timeout errors that indicate no frame activity at all. Both physical and hardware problems can cause link resets to increase. Recommended Respond to this message as is appropriate to the particular policy of the end-user installation. Action Severity INFO FW-1200 Message , [FW-1200], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of C3 discard frames has changed due to a timeout . Recommended Check the target device; it could be slow. Action Severity INFO FW-1201 Message , [FW-1201], ,, INFO, , , , is below low boundaries (High=, Low=). Current value is . Probable Cause Indicates that the number of C3 discard frames has gone down due to a timeout. Recommended Respond to this message as it is appropriate to the particular policy of the end-user installation. A Action low number of C3 discard means that the switch is functioning normally. Severity INFO FW-1202 Message , [FW-1202], ,, WARNING, , , , is above high boundaries (High=, Low=). Current value is . Probable Cause Indicates that the number of C3 discard frames has exceeded its threshold limit Recommended Check the target device; it could be slow. Action Severity WARNING 306 Fabric OS Message Reference 53-1001338-01