HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 777
SULB-1031, Recommended, Action, firmwareDownload, Severity, Message, Probable Cause, firmwareShow
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 777 highlights
125 SULB-1031 Recommended Action The firmwareDownload command will continue after the switch has rebooted. Run the firmwareDownloadStatus command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, , , , Relocating an internal firmware image on the CP. Probable Cause Indicates the switch has rebooted with the new firmware and is relocating the AP firmware. Recommended Wait for the operation to complete. Action Severity WARNING SULB-1032 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, , , , Relocating an internal firmware image on the CP. Probable Cause Indicates the switch has started firmware download to the co-CPU. Recommended Wait for the operation to complete. Action Severity WARNING SULB-1033 Message AUDIT, , [SULB-1033], WARNING, FIRMWARE, , , , Switch has completed relocating the internal firmware image. Probable Cause Indicates the firmwareDownload process has completed on the switch. Recommended Run the firmwareShow command to verify the firmware versions. Run the switchShow command to Action make sure the switch is enabled. Severity WARNING SULB-1034 Message Probable Cause AUDIT, , [SULB-1034], ERROR, FIRMWARE, , , , Firmwaredownload timed out. Indicates there may be an error caused by a switch initialization issue after the internal image is relocated. It may also be caused by an internal Ethernet issue or by persistent storage failure. Fabric OS Message Reference 707 53-1001338-01