HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 253
FABS System Messages
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
Chapter FABS System Messages 27 FABS-1001 Message , [FABS-1001], , FFDC, CRITICAL, , Probable Cause Indicates that the system is low on memory and cannot allocate more memory for new operations. This is usually an internal Fabric OS problem or file corruption. Description of memory need indicates how much memory was being requested. The value could be any whole number. Recommended Reboot or power cycle the switch. Action Severity CRITICAL FABS-1002 Message , [FABS-1002], ,, WARNING, , Probable Cause Indicates that an internal problem has been detected by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], ,, WARNING, , process () Probable Cause Indicates that an operation has been interrupted by a signal. This is usually an internal Fabric OS problem or file corruption. Recommended Reboot or power cycle the switch. Action Severity WARNING Fabric OS Message Reference 183 53-1001338-01