HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 294
FCR-1076, FCR-1077, FCR-1078, FCR-1079
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 294 highlights
34 FCR-1076 FCR-1076 Message , [FCR-1076], ,, ERROR, , Port disabled, system only supports front domains. Probable Cause Indicates that the maximum number of supported front domains was exceeded. To enable the specified port, disable any other operational front domain and then re-enable the port. Recommended Make sure to remain within the maximum of supported front domains. Action Severity ERROR FCR-1077 Message , [FCR-1077], ,, WARNING, , Port rejected fabric binding request/check from the M-Model switch; . Probable Cause Indicates that an M-Model edge switch attempted to either activate or check the fabric binding. This port will be disabled if this event occurred during a check of fabric binding and not during failure to activate fabric binding. The error is caused when the binding list details configured on the M-Model switch does not match with the currently configured front port domain ID and WWN of the EX_Port on which this operation was attempted. Recommended Ensure that the M-Model switch has the same currently configured details such as front port Action domain ID and WWN of the EX_Port on which this operation was attempted. Severity WARNING FCR-1078 Message , [FCR-1078], ,, WARNING, , LSAN name is too long. It is dropped. Probable Cause Indicates that the length of the LSAN name exceeds the limit of 64 characters. Recommended Change the name and reactivate the zone database. Action Severity WARNING FCR-1079 Message Probable Cause , [FCR-1079], ,, WARNING, , Domain has conflict matrix database with local domain. Indicates that the specified domain has a different matrix database from the local domain. 224 Fabric OS Message Reference 53-1001338-01