HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 602
SEC-1159, Message, Probable Cause, Recommended, Action, secFabricShow, Severity, secModeEnable
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 602 highlights
90 SEC-1159 SEC-1159 Message , [SEC-1159], ,, INFO, , Non_Reachable domain . Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity INFO SEC-1160 Message , [SEC-1160], ,, INFO, , Duplicate port in port list (). Probable Cause Indicates a duplicate port member exists in the specified port list. Recommended Verify that there is no duplicate member in the port list. Action Severity INFO SEC-1163 Message , [SEC-1163], ,, ERROR, , System is already in secure mode. Lockdown option cannot be applied. Probable Cause Indicates the lockdown option was attempted while the fabric is already in secure mode. Recommended Do not use lockdown option with the secModeEnable command when a switch is already in secure Action mode. Severity ERROR SEC-1164 Message , [SEC-1164], ,, ERROR, , Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates the attempt to enable security is made on a switch that is not present in the fabric configuration server (FCS) list. Recommended Add the switch to the FCS policy list when using the lockdown option to enable security. Action 532 Fabric OS Message Reference 53-1001338-01