HP 8/40 Brocade Fabric OS Message Reference v6.3.0 (53-1001338-01, July 2009) - Page 693
TS System Messages
View all HP 8/40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 693 highlights
TS System Messages Chapter 103 TS-1001 Message , [TS-1001], ,, WARNING, , NTP Query failed: . Probable Cause Indicates a network time protocol (NTP) query to the configured external clock server failed. Local clock time on the principal or primary fabric configuration server (FCS) switch is used for fabric synchronization. This might be logged during temporary operational issues such as IP network connection issues to the external clock server. If it does not recur, it can be ignored. Recommended Verify the configured external clock server is available and functional. If that external clock server is Action not available, choose another. Severity WARNING TS-1002 Message , [TS-1002], ,, INFO, , < Type of clock server used > Clock Server used instead of < Type of clock server configured >: locl: 0x remote: 0x. Probable Cause Indicates the fabric time synchronization distributed from the principal or primary fabric configuration server (FCS) switch was not sourced from the Type of clock server configured, instead, an alternate server was used, indicated by Type of clock server used. The type of clock server used or configured might be either one of the following: • LOCL Local clock on the principal or primary FCS switch • External External NTP server address configured This might be logged during temporary operational issues such as IP network connection issues to the external clock server or if the fabric is configured for external time synchronization but the principal or primary FCS does not support the feature. If the message does not recur, it should be ignored. Recommended Action Run the tsClockServer command to verify that the principal or primary FCS switch has the clock server IP configured correctly. Verify this clock server is accessible to the switch and functional. If the principal or primary FCS does not support the feature, either choose a different switch for the role or reset the clock server to LOCL. Severity INFO Fabric OS Message Reference 623 53-1001338-01