HP 9100C HP 9100C Digital Sender - (English) User Guide - Page 99
Control panel messages, Message, Description, Action - error codes
UPC - 088698634387
View all HP 9100C manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Note Control panel messages This following table lists the messages the control panel might display while you are using the digital sender, the cause of the message, and recommended actions. The messages are listed in alphabetical order. Messages that report normal status are not included. Control panel messages Message AB Error codes Cannot connect to PC. Configuration changed. Please wait... Device unreachable. Description Action An internal problem in Turn the digital sender off and then accessing address books back on. has occurred. If the problem persists, note the codes and contact the administrator. You selected the PC Make sure the destination computer function, but the is turned on. destination computer is Make sure the HP Digital Sender off or the HP Digital Link is running on the destination Sender Link is not running computer. If it is not, start it by on that computer. clicking Start, pointing to Programs, then HP 9100C, and clicking HP Digital Sender Link. Make sure the Enable Receive setting for the HP Digital Sender Link is enabled. To check this, click the Receive inbox tab in the Control Panel applet and verify that the Enable receive check box is selected. Using the Control Panel applet of the HP Digital Sender Link, make sure a path to the receive inbox has been specified and that the path is correct. The administrator is Wait until the message clears. updating the digital sender with changes. The digital sender is unavailable for use while the update takes place. You selected the HP Make sure the destination device is JetSend function, but the turned on. destination device is off. EN Troubleshooting the digital sender 97