HP A7533A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 187
for 4/256 SAN Director and DC Director on 6.0, and then retry the firmware download operation.
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
Message SW Blade type 51 is inserted. Please use slotshow to find out which slot it is in and remove it. Probable cause and recommended action The firmware download operation was attempting to downgrade a system to Fabric OS 5.3.0 or earlier with one or more FC8-48 port blades (blade ID 51) in the system. FC8-48 port blades are not supported on firmware 5.3.0 or earlier, so the firmware download operation failed. Use the slotShow command to display which slot the FC8-48 port blade is in. Physically remove the blade(s) from the chassis, or use the micro-switch to turn the blade off. Retry the firmware download operation. Message SW Blade type 55 is inserted. Please use slotshow to find out which slot it is in and remove it. Probable cause and recommended action The firmware download operation was attempting to downgrade a system to Fabric OS 5.3.0 or earlier with one or more FC8-32 port blades (blade ID 55) in the system. FC8-32 port blades are not supported on firmware 5.3.0 or earlier, so the firmware download operation failed. Use the slotShow command to display which slot the FC8-32 port blade is in. Physically remove the blade(s) from the chassis, or use the micro-switch to turn the blade off. Retry the firmware download operation. Message Only platform options 1 and 5 are supported by version 6.0. Use chassisconfig to reset the option before downloading the firmware. Probable cause and recommended action The firmware download operation was attempting to upgrade a system to Fabric OS 6.0. The chassisConfig option was set to 2, 3 or 4, which are not supported in 6.0, so the firmware download operation was aborted. Execute the chassisConfig command with a supported option (1 or 5 for 4/256 SAN Director; and 5 for 4/256 SAN Director and DC Director on 6.0), and then retry the firmware download operation. The supported options are: option 1 One 128-port switch with the following configuration: FC2-16 (blade ID 4), FC4-16 (blade ID 17) on slots 1-4 and 7-10; CP2 (blade ID 5), CP4 (blade ID 16) on slots 5-6 option 5 One 384-port switch with the following configuration: FC4-16 (blade ID 17), FC4-32 (blade ID 18) FR4-18i (Blade ID 24), FR4-18i (blade ID 31, (blade ID 33), 36, FC10-6 (blade ID 39) on slots 1-4 and 7-10; CP4 (blade ID 16) on slots 5-6 Message Cannot downgrade to 5.1.0 because Device Based routing policy is not supported by 5.1.0. Use aptPolicy to change the routing policy before proceeding. Probable cause and recommended action The firmware download operation was attempting to upgrade a system to Fabric OS 5.1.0 with device-based routing policy selected. Device-based routing policy is not supported in firmware 5.1.0 or later, so the firmware download operation was aborted. Fabric OS 6.x administrator guide 187