HP A7533A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 430
policy --delete, policy --show ike all, policy --delete ipsec 10
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 430 highlights
The example below shows all of the IKE policies defined; in this example, there are two IKE policies. switch:admin06> policy --show ike all IKE Policy 1 Authentication Algorithm: MD5 Encryption: 3DES Perfect Forward Secrecy: off Diffie-Hellman Group: 1 SA Life (seconds): 0 IKE Policy 32 Authentication Algorithm: SHA-1 Encryption: AES-128 Perfect Forward Secrecy: on Diffie-Hellman Group: 1 SA Life (seconds): 28800 Operation Succeeded Policies cannot be modified. You must delete and then recreate a policy with the new parameters. To delete a policy: 1. Log in to the switch as admin. 2. Enter the following command. policy --delete type number where type is the policy type and number is the number assigned. For example, to delete the IPSec policy number 10: switch:admin06> policy --delete ipsec 10 The policy has been successfully deleted. To view IPSec information for an FCIP tunnel: The following example shows the portShow fcipTunnel command used to display IPSec information for tunnel 0: switch:admin06> portshow fciptunnel 8/ge0 3 -ipsec Port: ge0 Tunnel ID 3 Remote IP Addr 192.175.5.200 Local IP Addr 192.175.5.100 Remote WWN Not Configured Local WWN 10:00:00:05:1e:37:00:20 Compression off Fastwrite on Tape Pipelining on Uncommitted bandwidth, minimum of 1000 Kbps (0.001000 Gbps) 430 Configuring and monitoring FCIP extension services