HP A7533A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 34
Licensed features
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
The Fabric has 4 switches The fields in the fabricShow display are: Switch ID - The switch Domain_ID and embedded port D_ID Worldwide Name - The switch WWN Enet IP Addr - The switch Ethernet IP address for IPv4 and IPv6 configured switches. For IPv6 switches, only the static IP address displays FC IP Addr -The switch FC IP address Name -The switch symbolic name. An arrow (>) indicates the principal switch. To set the Domain ID: 1. Connect to the switch and log in using an admin account. 2. Enter the switchDisable command to disable the switch. 3. Enter the configure command. 4. Enter y after the Fabric parameters prompt: Fabric parameters (yes, y, no, n): [no] y 5. Enter a unique Domain ID at the Domain prompt. Use a Domain ID value from 1 through 239 for normal operating mode (FCSW compatible): Domain: (1..239) [1] 3 6. Respond to the remaining prompts, or press Ctrl-D to accept the other settings and exit. 7. Enter the switchEnable command to re-enable the switch. Licensed features You need the following items for each feature that needs to be licensed: • Transaction key in the paperpack document supplied with the switch software. Or, when you purchased a license, you received a transaction key to use for generating a software license key. • License ID. To see a switch license ID, issue the licenseIdShow command. Feature licenses may be part of the licensed paperpack supplied with your switch software; if not, you can purchase licenses separately from HP. License keys are provided on a per-product and per-feature basis. Each switch within a fabric will need its own licensing. NOTE: To preserve licenses on your switch, perform a configupload prior to upgrading or downgrading your Fabric OS. If you downgrade your Fabric OS to the version earlier than 6.x, some licenses associated with specific features of Fabric OS 6.x may not work. Licenses can be associated with a feature version or a blade type. • If a feature has a version-based license, that license is valid only for a particular version of the feature. If you want a newer version of the feature, you must purchase a new license. Version upgrade: For example, a zoning license that is for Fabric OS version 6.x is added. You can add another zoning license with a version greater than 5.2.0 and above without removing the zoning license for Fabric OS 5.2.0. Upgrading is allowed, but downgrading is not supported. If a license is not version-based, then it is valid for all versions of the feature. • If a license is associated with a blade type, the licensed feature can be used only with the associated blade; if you want to use the feature on a second blade, you must purchase an additional license. 34 Standard features