HP A7533A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 398
You are about to save the Defined zoning configuration.
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 398 highlights
To remove devices (members) from a zone: 1. Connect to the switch and log in as admin. 2. Enter the zoneRemove command, using the following syntax: zoneremove "zonename", "member[; member...]" The values represent the following: zonename The name of the zone to be created. member A member or list of members to be removed from the zone. A zone member can be specified by one or more of the following methods: • A domain,port pair. • Device node or device port WWN • Zone alias name 3. Enter the cfgSave command to save the change to the defined configuration. switch:admin> zoneremove "greenzone", "1,2" switch:admin> zoneremove "redzone", "21:00:00:20:37:0c:72:51" switch:admin> zoneremove "broadcast", "2,34" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y To delete a zone: 1. Connect to the switch and log in as admin. 2. Enter the zoneDelete command, using the following syntax: zonedelete "zonename" The value represents the following: zonename The name of the zone to be deleted. 3. Enter the cfgSave command to save the change to the defined configuration. switch:admin> zonedelete "redzone" switch:admin> cfgsave You are about to save the Defined zoning configuration. This action will only save the changes on the Defined configuration. Any changes made on the Effective configuration will not take effect until it is re-enabled. Do you want to save Defined zoning configuration only? (yes, y, no, n): [no] y To view a zone in the defined configuration: 1. Connect to the switch and log in as admin. 2. Enter the zoneShow command, using the following syntax: zoneshow "pattern"[, mode] 398 Administering Advanced Zoning