HP A7533A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 49
Fabric Watch Administrator's Guide
UPC - 829160830858
View all HP A7533A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
To view the switch status policy threshold values: 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchStatusPolicyShow command. Whenever there is a switch change, an error message is logged and an SNMP connUnitStatusChange trap is sent. The output is similar to the following: switch:admin> switchstatuspolicyshow The current overall switch status policy parameters: Down Marginal PowerSupplies 3 0 Temperatures 2 1 Fans 2 1 WWN 0 1 CP 0 1 Blade 0 1 Flash 0 1 MarginalPorts 2 1 FaultyPorts 2 1 MissingSFPs 0 0 The policy parameter determines the number of failed or inoperable units for each contributor that will trigger a status change in the switch. Each parameter can be adjusted so that a specific threshold must be reached before that parameter changes the overall status of a switch to MARGINAL or DOWN. For example, if the FaultyPorts DOWN parameter is set to 3, the status of the switch will change if 3 ports fail. Only one policy parameter needs to pass the MARGINAL or DOWN threshold to change the overall status of the switch. For more information about setting policy parameters, see the Fabric Watch Administrator's Guide. To set the switch status policy threshold values: 1. Connect to the switch and log in using an account assigned to the admin role. 2. Enter the switchStatusPolicySet command. The current switch status policy parameter values are displayed. You are prompted to enter values for each DOWN and MARGINAL threshold parameter. By setting the DOWN and MARGINAL values for a parameter to 0,0 that parameter is no longer used in setting the overall status for the switch. Fabric OS 6.x administrator guide 49