HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 176
from a USB device
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
firmwaredownload from a USB device The DC Director supports a firmware download from the USB device attached to the active CP. NOTE: The USB device ships with the DC Director only. Before the USB device can be accessed by the firmwaredownload command, it must be enabled and mounted as a file system. The firmware images to be downloaded must be stored under the /firmware directory in the USB file system. Multiple images can be stored under this directory. There is a firmwarekey directory where the public key signed firmware is stored. When the firmwaredownload command line option, -U (upper case), is specified, the firmwaredownload command will download the specified firmware image from the USB device. When specifying a path to a firmware image in the USB device, you can only specify the relative path to /firmware or the absolute path. To enable USB: 1. Log in to the switch using an account assigned to the admin role. 2. Type the following command: usbstorage -e To view the USB file system: 1. Log in to the switch using an account assigned to the admin role. 2. Type the usbstorage -l command: admin>usbstorage -l /usb/usbstorage/brocade/firmware/ 6.0.0/ /usb/usbstorage/brocade/firmwarekey/pubkey.pem To download the 6.0 image using the relative path: 1. Log in to the switch as admin. 2. Type the firmwaredownload command with the -U operand: admin>firmwaredownload -U 6.0 To download the 6.0 image using the absolute path: 1. Log in to the switch as admin. 2. Type the firmwaredownload command with the -U operand: admin>firmwaredownload -U /usb/usbstorage/brocade/firmware/6.0 176 Installing and maintaining firmware