HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 253
Pending Zone Membership List
![]() |
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
6. To add devices that are connected to the Brocade fabric, click Edit in the Pending Zone set. 7. On the Modify Zone tab, enter the device WWN into the World Wide Name field and click Add. The Pending Zone Membership List is updated with the new Zone members. If you are using EFCM, select Potential Zone Members > New Member, enter the WWN port name, and click Add. NOTE: The procedures described in this section were current when the document was written, but may have changed since then. Refer to the Zoning User Manual available per the HP switch product web page. 8. Select the Zone Set tab in SAN Pilot. If you are using EFCM or the Zoneset Library window, tab to Zone Sets and select File > New. 9. Enter a name for the Pending Zone set in Zone Set Name and select Rename. The steps for EFCM will be similar. 10. Click Save and Activate the Pending Zone set. The zones in the Pending Zone set are added to the Zone Set that you specified. In EFCM, return to the main window and select Configure, then select Activate Zone Set to launch the zone set activation window. Highlight the zone set to be activated and click Next. Click Next again, then Start to activate the zone set. Fabric OS 6.x administrator guide 253
![](/manual_guide/products/hewlettpackard-ae370a-hp-storageworks-fabric-os-6x-administrator-guide-56970015-2009-6d92f40/253.png)