HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 456

2 OFF OFF OFF OFF OFF OFF 3 OFF OFF OFF OFF OFF OFF 4 OFF OFF OFF OFF OFF OFF 5 OFF OFF OFF OFF OFF OFF 6 OFF OFF OFF OFF OFF OFF 7 OFF OFF OFF OFF OFF OFF PARAMETERS TunnelId WrtPipe RdPipe WrtDevs RdDevs WrtTimer WrtChain OxidBase DebugFlags 0 000 000 00 00 0000 0000000 0x0000 0x00000000 1 000 000 00 00 0000 0000000 0x0000 0x00000000 2 000 000 00 00 0000 0000000 0x0000 0x00000000 3 000 000 00 00 0000 0000000 0x0000 0x00000000 4 000 000 00 00 0000 0000000 0x0000 0x00000000 5 000 000 00 00 0000 0000000 0x0000 0x00000000 6 000 000 00 00 0000 0000000 0x0000 0x00000000 7 000 000 00 00 0000 0000000 0x0000 0x00000000 FTRACE output control and display The portshow ftrace command can be used to control and display FTRACE output. The capitalized letters in the options represent the minimum set of characters that must be entered. Control arguments that change configuration parameters (such as buffers) are not saved in persistent memory. NOTE: This command is primarily for use by technical support personnel. portShow ftrace [slot/]ge0|ge1 tunnel-id arguments slot ge0|ge1 tunnel-id Specify the slot number of a blade in a multi-slot chassis. The Ethernet port (ge0 or ge1). Tunnel number (0-7). arguments are as follows. ACO on|off Enable/Disable/Display Auto Check Out. ACTivate 0-xx Activate trace 'xx' for viewing. AScii (8 Set/reset the ASCII filter. characters) B Display the bottom (most recent) trace. BUffers n Specify the number of buffers to configure for a tunnel. CCfg Display the current FTRACE configuration. CI xx | all Check In trace buffer 'xx', or all buffers. CO xx | all Check Out trace buffer 'xx', or all buffers. COA xx Check out and activate trace buffer xx. COMmand Set/Reset the FICON command frame filter. CONfig xx|all Activate a configuration. DControl Set/Reset the FICON device control frame filter. DISAble Disable traces for a tunnel. DISPlaymask Set/Display the display mask (0-FFFFFFFF). 456 Configuring and monitoring FCIP extension services