HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 186
Message, Probable cause and recommended action
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 186 highlights
Use the slotShow command to display which slot the FC4-16IP port blade is in. Physically remove the blade(s) from the chassis, or use the micro-switch to turn the blade off. Retry the firmware download operation. Message AP Blade type 33 is inserted. Please use slotshow to find out which slot it is in and remove it. Cannot downgrade due to the presence of AP BLADE type 33. Remove or power off these blades before proceeding. Probable cause and recommended action The firmware download operation was attempting to download Fabric OS 5.0.0 with one or more FR4-18i port blades (blade ID 33) in the system. FR4-18i port blades are not supported on firmware 5.0.0 or earlier, so the firmware download operation is aborted. Use the slotShow command to display which slot the FR4-18i port blade is in, and physically remove the blade(s) from the chassis Retry the firmware download operation. Message SW Blade type 36 is inserted. Please use slotshow to find out which slot it is in and remove it. Probable cause and recommended action The firmware download operation was attempting to downgrade a system to Fabric OS 5.1.0 or earlier with one or more FC4-48 port blades (blade ID 36) in the system. FC4-48 port blades are not supported on firmware 5.1.0 or earlier, so the firmware download operation failed. Use the slotShow command to display which slot the FC4-48 port blade is in. Physically remove the blade(s) from the chassis, or use the micro-switch to turn the blade off. Retry the firmware download operation. Message SW Blade type 37 is inserted. Please use slotshow to find out which slot it is in and remove it. Probable cause and recommended action The firmware download operation was attempting to downgrade a system to Fabric OS 5.3.0 or earlier with one or more FC8-16 port blades (blade ID 37) in the system. FC8-16 port blades are not supported on firmware 5.3.0 or earlier, so the firmware download operation failed. Use the slotShow command to display which slot the FC8-16 port blade is in. Physically remove the blade(s) from the chassis, or use the micro-switch to turn the blade off. Retry the firmware download operation. Message SW Blade type 39 is inserted. Please use slotshow to find out which slot it is in and remove it. Probable cause and recommended action The firmware download operation was attempting to downgrade a system to Fabric OS 5.2.0 or earlier with one or more FC10-6 port blades (blade ID 39) in the system. FC10-6 port blades are not supported on firmware 5.2.0 or earlier, so the firmware download operation failed. Use the slotShow command to display which slot the FC10-6 port blade is in. Physically remove the blade(s) from the chassis, or use the micro-switch to turn the blade off. Retry the firmware download operation. 186 Installing and maintaining firmware