HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 206

Viewing routing path information The topologyShow and uRouteShow commands provide information about the routing path. 1. Connect to the switch and log in as admin. 2. Enter the topologyShow command to display the fabric topology, as it appears to the local switch: switch:admin> topologyshow 4 domains in the fabric; Local Domain ID: 2 Domain: Metric: Name: Path Count: 1 10500 fcr_xd_1_1 1 Hops: 2 Out Port: 39 In Ports: 35 56 Total Bandwidth: 4.000 Gbps Bandwidth Demand: 300 % Flags: D switch:admin> The following information displays: Local Domain ID Domain Metric Name Path Count Hops Out Port In Ports Total Bandwidth Bandwidth Demand Flags The domain number of the local switch. The domain number of the destination switch. The cost of reaching the destination domain. The name of the destination switch. The number of currently active paths to the destination domain. The maximum number of switch-to-switch links (ISLs) transversed to reach the destination domain. The port to which the incoming frame will be forwarded in order to reach the destination domain. The input ports that use the corresponding Out Port to reach the destination domain. The maximum bandwidth of the out port. The maximum bandwidth demand of the in ports. An indication whether the route is dynamic (D) or static (S). This value is always "D", indicating a dynamic path. 206 Routing traffic