HP AE370A HP StorageWorks Fabric OS 6.x administrator guide (5697-0015, May 20 - Page 191
Blade troubleshooting tips
![]() |
UPC - 882780362611
View all HP AE370A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Message The command failed due to the current zone size is not supported by the new firmware. Reduce the size of the configuration before proceeding. Probable cause and recommended action The firmware download operation was attempting to downgrade a system to Fabric OS 5.1.0 or earlier and the current zone size is not supported by the firmware version to be downloaded, so the firmware download operation failed. Reduce the zone database size to 256 KB. Verify that the zone size is below the 256 KB limit using the cfgSize command. Retry the firmware download operation. Message Default IP filter policies are not active on the switch. Please make the default IP4 filter policies active before downgrading. Probable cause and recommended action If switch is running 5.3.0 or higher, and if any of the user created IP filter policies are active, the user will not be allowed to downgrade to 5.2.0 or lower. Blade troubleshooting tips Typically, issues detected during firmware download to AP blades do not require recovery actions on your part. However, if any of the following events occur, perform the appropriate following action: • The blade is faulty (issue slotShow to confirm). If the blade is faulty, enter the slotPowerOff and slotPowerOn commands for the blade. If the blade still appears to be faulty, remove it and re-insert it into the chassis. • The blade is stuck in the "LOADING" state (issue slotShow to confirm). If the blade remains in the loading state for a significant period of time, the firmware download will time out. Remove the blade and re-insert it. When it boots up, autoleveling will be triggered and the firmware download will be attempted again. If you experience frequent failovers between CPs that have different versions of firmware, then you may notice multiple blade firmware downloads and a longer startup time. Fabric OS 6.x administrator guide 191
![](/manual_guide/products/hewlettpackard-ae370a-hp-storageworks-fabric-os-6x-administrator-guide-56970015-2009-6d92f40/191.png)