HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat
HP Bc1500 - BladeSystem - Blade PC Manual
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Bc1500 manual content summary:
- HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 1
User Guide HP BladeSystem PC Blade Enclosure Integrated Administrator for CCI v1.4 Document Part Number: 410728-002 June 2006 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP loss of information. User Guide HP BladeSystem PC Blade Enclosure Integrated Administrator for CCI v1.4 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 3
Guide 1-1 Audience Assumptions 1-1 Symbols In Text 1-1 Important Safety Information 1-1 Symbols On Equipment 1-1 Related Documents 1-2 Getting Help 1-3 Contact HP 1-3 Support and Troubleshooting 1-3 HP Web site 1-3 Reader Comments 1-3 2 HP PC Blade Enclosure System Software Features HP PC - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 4
Determining the IP Address using the Local Console 3-3 Setting Up the Web-Based User Interface Blade PC Bay Management Commands 5-15 Command Line Event Messages 5-18 Functionality Exclusive to the Command Line Interface 5-19 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 5
Performing Common Administrative Tasks Managing Blade PC Bays 7-1 Opening a Remote Console Session to a Blade PC 7-1 Accessing the ROM-Based Setup Utility for a blade PC 7-2 Reviewing Activity for a Blade PC 7-3 Powering Off the Blade PC 7-4 Identifying a Blade PC Using the Unit Identification - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 6
8-6 Upgrading the Integrated Administrator Firmware 8-6 Recovering a Lost Administrator Password 8-7 Launching Flash Disaster Recovery 8-8 A Command Line Conventions B Error Messages Warning Messages B-1 Enclosure Warning Messages B-1 Blade PC Warning Messages B-2 Administration Warning - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 7
1 Introduction About This Guide This guide provides step-by-step instructions for operation, and reference information for advanced operation, troubleshooting, and future upgrades for the HP PC Blade Enclosure Integrated Administrator for a Consolidated Client Infrastructure (CCI) v1.4 solution. - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 8
Guide ■ QuickSpecs ■ Setup and Installation Guide: HP BladeSystem bc1500 Blade PC and PC Blade Enclosure ■ White paper: HP Rack 9000 and 10000 Series installation and best practices ■ Installation Guide: HP BladeSystem PC Blade Switch ■ Command Line Interface Reference Guide: HP BladeSystem PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 9
product as well as the latest drivers and flash ROM images. Access the HP Web site at http://www.hp.com. Reader Comments HP welcomes your comments on this guide. Go to the following site to send your comments and suggestions: www.hp.com/go/cci. HP PC Blade Enclosure Integrated Administrator for CCI - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 10
Introduction 1-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 11
2 HP PC Blade Enclosure System Software Features The HP BladeSystem offers an extensive set of features and optional tools to support effective blade PC management and software deployment. This chapter describes the HP PC Blade Enclosure Integrated Administrator and provides a brief overview of - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 12
HP PC Blade Enclosure System Software Features SNMP alerts from Integrated Administrator to a management console The Integrated Administrator provides notification of enclosure problems. Using a management console, you can access various alerts, such as unauthorized access attempts and network - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 13
address from the DHCP server on the network. HP Systems Insight Manager console ■ Management processor -The HP Systems Insight Manager utility adds support for a new device type, the management processor. All Integrated Administrators (in HP PC Blade Enclosure) on the network are discovered in the HP - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 14
or go to: www.hp.com/servers/rdp HP Systems Insight Manager HP Systems Insight Manager is an easy-to-use, intuitive software utility designed for collecting blade PC information, including fault conditions, performance, security, remote management, and recovery services. The HP BladeSystem is fully - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 15
for the HP PC Blade Enclosure (option). Full featured Web-based and menu-driven console interfaces are provided management of the interconnect switch. You can configure both interfaces to require a valid user name and password for authentication. RMON and SNMP manageability are supported with an - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 16
HP PC Blade Enclosure System Software Features 2-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 17
PC. Ä CAUTION: Without the blade PC health driver or an ACPI-compliant operating system, the Integrated Administrator cannot gracefully shut down a blade PC. This condition may result in the permanent loss of critical data. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 18
HP PC Blade Telnet, or Secure Shell. 2 Console (serial) connector for local access HP recommends that you connect a local client device, such as a laptop computer, to the console Integrated Administrator locally using the console (serial) connector, you console 3-2 HP PC Blade Enclosure Integrated Administrator for - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 19
password HP recommends changing the Administrator password when accessing Integrated Administrator for the first time. Determining the IP Address using the Local Console ) console connector the password on server server is not attached to the network, type the following commands sequentially HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 20
. The Certificate Manager Import Wizard starts. b. Click Next. c. Click Next for the browser to automatically select the certificate store when the Certificate Store window appears. 3-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 21
below) prompts you for a user name and password. Use the default user name and password from the settings tag attached to the interconnect Log In. After the default user name and password have been verified, the summary window appears. The HP PC Blade Enclosure Integrated Administrator for CCI v1.4 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 22
HP recommends performing the following tasks: ■ Change the Administrator password ■ Set the date and time ■ Name the enclosure and rack ■ Set up groups, users, and access privileges For detailed instructions Administrator. 3-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 23
the Web-based user interface is not supported from the console (serial) connector. To access the services, you need to configure a static IP address. See Chapter 3, in section "Determining the IP Address using the Local Console." 3. Type the user name and password at the Login prompt. HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 24
panel: ■ Printable View - Opens a separate window that shows information for cutting and pasting purposes. ■ Log Out - Logs you out of the Web-based user interface. 4-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 25
each tab. Information appearing in the deck panel depends on the option chosen by the user from within the top panel and the left panel. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 26
buttons appear on the Enclosure Information screen: ■ Apply - Saves changes made to the screen. ■ Cancel - Restores all fields on the screen to their original values. 4-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 27
input to power supply #1 and AC input to power supply #2. Power Supply Spare Number The spare number for the power supplies installed in the enclosure. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 28
Settings." Interconnect Tray Type HP PC Blade Enclosure Interconnect Switch HP PC Blade Enclosure RJ-21 Interconnect Switch HP PC Blade Enclosure RJ-45 Interconnect Switch The MAC address of the Integrated Administrator. 4-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 29
the default time zone, see Appendix E, "Factory Default Settings." For a list of all supported time zones, see Appendix F, "Time Zone Settings." For a detailed description of how to zones, refer to Appendix F, "Time Zone Settings." HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 30
. These settings are specific to the enclosure and do not affect the network configurations for blade PCs. Two buttons appear at the bottom of this screen: ■ Apply - Saves changes made comprise the Network Configuration screen. 4-8 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 31
IP is selected). DNS Server 1 where ### ranges from 0 to 255. The IP address for the primary DNS server (optional field if Static IP is selected). DNS Server 2 where ### ranges affect the network configurations for blade PCs. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 32
including all alphanumeric, dash, underscore, and space characters The SNMP contact of the enclosure For the default SNMP location, see Appendix E, "Factory Default Settings." 4-10 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 33
Buttons screen (shown below) enables an enclosure administrator to modify the power state of the enclosure and Unit Identification LED from a remote location to facilitate troubleshooting by technicians in the data center. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-11 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 34
and does not affect the blade PCs. Click Restart Integrated Administrator only at the direction of HP support personnel. Click Apply for immediately. Whenever possible, HP recommends that you use the operating system shutdown procedures before powering down a blade PC or enclosure. After the - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 35
: ■ Refresh - Refreshes the screen. ■ Clear - Clears the system log. Bays Tab The Bays tab provides access to the following screens: ■ Bay List ■ Bay Information ■ Remote Console ■ Virtual Buttons ■ Console Log HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-13 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 36
of the blade PC. NOTE: Without the blade PC health driver properly installed, the Integrated Administrator cannot obtain the blade PC name. Name of the group that owns that bay. The status and power state of the blade PC. 4-14 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 37
blade PC health driver. The Bay Information screen (shown below) enables an enclosure administrator to observe the status and general information for a blade PC in a given blade PC bay. Group administrators and group members with View rights to the blade PC bay can also observe this information. HP - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 38
PC. ROM version on the blade PC. Type of processor on the blade PC. Speed associated with the blade PC processor. Amount of memory installed on the blade PC. MAC address of the NIC 1 interface and the NIC 2 interface. 4-16 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 39
with permissions can use the Virtual Buttons screen (shown below) to modify the state of the power state and Unit Identification LED of a blade PC in order to facilitate troubleshooting from a remote location. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-17 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 40
with the Integrated Administrator, see Chapter 6, section " Enabling Remote Console Sessions to Blade PCs." Under the Administration tab, you can access the following screens: ■ User List ■ Group List ■ Add User ■ Add Group 4-18 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 41
administrator or enclosure administrator to observe and update user access to groups and blade PC bays. The following table lists the permissions related to the action buttons of administrators can execute this command. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-19 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 42
. Group List The Group List screen (shown below) enables an enclosure administrator to observe and update the assignment of groups and users to blade PC bays. Two buttons appear on this screen: ■ View/Modify Group-Opens the View/Modify Group screen. ■ Remove Group-Removes the selected group. 4-20 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 43
Field Descriptions Field Description Group Name Group name Assigned Bays Blade PC bays that the group owns Group Members Users with membership an enclosure administrator to create a user profile, including group and blade PC bays assignments. Two buttons appear on this screen: ■ Apply-Saves - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 44
-sensitive. Password 3-8 characters including all printable characters User's password. Confirm Password 3-8 characters including all printable characters User's password. Account groups in the Group Membership text box. 4-22 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 45
enables an enclosure administrator to create a group profile, including user and blade PC bays assignments. ✎ Grayed-out check boxes are unavailable because they are already fields on this screen to their original values. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-23 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 46
User screen provides the same functions and has the same access as the Add User screen. See the "Add User" section in this chapter. 4-24 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 47
. The Event List screen (shown below) provides the following information for each event: ■ Severity ■ Source ■ Date ■ Time ■ Event Details (the example below indicates a fan failure) HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-25 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 48
allows enclosure administrators to connect to the remote console of one of the interconnect switches if installed. The following table describes the information displayed in the areas that comprise the Interconnect Tray screen. 4-26 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 49
present if an interconnect switch is installed) Switch A button Opens a new window to the remote console of switch A. Switch B button* Opens a new window to the remote console of switch B. * e-Class switches only. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 4-27 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 50
Web Browser Interface 4-28 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 51
commands ❏ Blade PC management commands listing of the commands supported by the Integrated Administrator. connector, locally through the console (serial) connector on the password, appears in clear text on that network. 3. Type the user name and password into the Login prompt. HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 52
Interface Accessing Locally through the Console Connector To access the Integrated get the login prompt. 3. Type the user name and password. Operating the Command Line Interface General Commands The following table None 5-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 53
console connection to switch A or B. A single switch cannot support multiple, simultaneous remote console server does not support anonymous connections, you can specify a username and password by augmenting the host part in the above format with username:password HP PC Blade Enclosure Integrated Administrator for CCI - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 54
| ] account password does memory of the enclosure, and the information is unrecoverable. When SCRIPT MODE is on, the following commands require a password argument: ADD USER, SET USER PASSWORD, or SET PASSWORD serial console HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 55
USER {} Adds a user to the system If a password is not given, the MODE is enabled, the password is not optional and must must be 3-8 characters long and includes all printable characters. If a password is HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 56
name> is case-sensitive. Only enclosure administrators may execute this command. The is case-sensitive. Note: Administrator, "switcha," and "switchb," cannot be removed. 5-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 57
's password. Only the Administrator account may modify the password of the Administrator account. The is case-sensitive. The must be 3-8 characters long and can include all printable characters. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 5-7 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 58
> Removes the user from the specified group. Only enclosure administrators may execute this command. The and are case-sensitive. 5-8 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 59
v1 traps are supported. Traps are TELNET Disables SNMP support for the server does not support anonymous connections, you can specify a user name and password by replacing the host part in the previous format with username:password HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 60
SET DNS {} Sets the primary and secondary DNS server addresses These servers are only used if the system is currently configured to use a static IP The default write community name is blank. 5-10 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 61
subnet mask, gateway address, primary and secondary DNS addresses, HTTP and HTTPS server status, SNMP status, Secure Shell status, and Telnet status of the enclosure. Only enclosure administrators may execute this command. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 5-11 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 62
hh is an integer from 0-23 • mm is an integer from 0-59 For a list of time zones, see Appendix F, "Time Zone Settings." NTP must be disabled before manually setting the date and time. specify the blank value using the quotes. 5-12 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 63
SHOW CONFIG Displays the script required to recreate the settings of the enclosure Passwords are not included for any user. Only the enclosure administrators may execute this type, part number, and serial number None HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 5-13 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 64
may execute this command. SHOW TRAY INFO Displays the manufacturer, product name, part number, serial number, and spare number of the interconnect tray. None 5-14 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 65
a firmware update for the BIOS ROM of certain HP blade PCs. CLEAR SESSION BAY Terminates a Terminal session from the enclosure. This is not a graceful termination. The connected user loses any unsaved work. CONNECT BAY Opens a remote console session to the blade PC with - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 66
only valid on present blades and is cleared if the blade is removed. This command may require a firmware update for the BIOS ROM of certain HP blade PCs. Only enclosure and group administrators may execute this command. 5-16 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 67
memory, NIC #1 MAC, and NIC #2 MAC. If no blade PC is in the bay, the user is shown the assigned to group and the blade PC Displays the assigned to group, remote console user, and blade PC name for each bay in a particular HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 5-17 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 68
the enclosure. Blade Removed A blade was removed from the enclosure. Blade Status Change Health driver detected a change in status due to a change in the state of one or more hardware components or blade PC readings. 5-18 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 69
ftp server does not support anonymous connections, you can specify a username and password by augmenting the host part in the above format with username:password@host. Capability Exclusive to CLI None All Only enclosure administrators may execute this command. All HP PC Blade Enclosure Integrated - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 70
The password of the Administrator account does not change. The Integrated Administrator is restarted after all the changes are made. Note: This command removes all groups, users, and other customization from the memory of the enclosure, and the information is unrecoverable. 5-20 HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 71
be used from the serial console to validate the identity of server does not support anonymous connections, you can specify a username and password by replacing the host part in the previous format with username:password@host. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 72
All the enclosure. Passwords are not included for server over the All network and uses the image to update the firmware blades. This command may require a firmware upgrade for the BIOS ROM of certain HP blade PCs. Only enclosure and group administrators may execute this command. 5-22 HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 73
is removed. This command may require a firmware upgrade for the BIOS ROM of certain HP blade PCs. Only enclosure and administrators may execute this command. SHOW BAY LIST [ALL | ] Displays the assigned to group, remote console user, and blade PC name for each bay in a particular - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 74
BAY Displays the syslog of a specified blade with 22 lines All per screen. Typing q quits the if more information is available to display. The system log of the blade PC is not stored between reboots, so the information only includes what 5-24 HP PC Blade Enclosure Integrated Administrator for CCI v1 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 75
SECONDARY | POLL] Sets the IP address of the primary and secondary NTP servers. Also sets the frequency of the updates. Only enclosure administrators may execute Only enclosure administrators may execute this command. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 5-25 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 76
Command Line Interface 5-26 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 77
Administrator password ❏ Modifying enclosure and rack names ❏ Modifying the asset tag number ❏ Modifying the date and time ■ Setting up user accounts ❏ Adding a group ❏ Adding a user ■ Enabling remote console sessions to blade PCs ■ Setting up AlertMail ❏ Adding mailbox address ❏ Adding SMTP server - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 78
"Command Line Conventions." These procedures are supported by the Web-based user interface and blade PC bay in which the blade PC is installed. Use the following table to distinguish the various permission levels available from the HP PC Blade Enclosure Integrated Administrator. 6-2 HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 79
blade PC bay privileges, manage the enclosure, manage blade PC View Group members may view blade PC bay data for groups in Password To change the default Administrator password using the Web-based user interface: 1. Click the Administration tab. 2. Click User List in the side panel. HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 80
Password. 6. Type in the new Administrator password in the Password and Confirm password fields. 7. Click OK. To change the default Administrator password using the CLI, type: SET USER PASSWORD Administrator 6-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 81
{TAG} ✎ The must be 1-31 characters long and includes alphanumeric, dash, and underscore characters. The default enclosure asset tag is blank. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 82
-hour time, an integer from 0-23) ■ mm: minute ■ CC: century ■ YY: year ■ TZ: timezone ✎ If the time zone is left blank, the current time zone is left in effect. For a list of supported time zones, see Appendix F, "Time Zone Settings." 6-6 HP PC Blade Enclosure Integrated Administrator for CCI v1 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 83
to manage blade PC bays and administer users by organizing those blade PC bays and blade PC bays through the following tasks: ■ Adding groups with access to specific blade PC a blade PC bay is gray, that blade PC bay is inaccessible because it already belongs to another group. HP PC Blade Enclosure - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 84
, see the "User Permissions" section in this chapter. 6. Click Apply. To create a group using the CLI, type the following commands sequentially: ADD GROUP 6-8 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 85
in the left panel. 3. Type the user information in the appropriate field. For information on "Account Type," see the "User Permissions" section in this chapter. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 86
Add User [View] or Add User [View/Modify]. For more information on permission levels, see the "User Permissions" section in this chapter. 5. Click Apply. 6-10 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 87
ALERTMAIL Disable Alertmail DISABLE ALERTMAIL * For security reasons, some SMTP servers will only forward mail if the sender's domain is set properly. You may need to set this parameter to match the network domain. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 6-11 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 88
supply removed ■ Power subsystem redundancy change ■ Blade inserted ■ Blade removed ■ Blade status change ■ Blade thermal change ■ Blade fault ✎ If the enclosure has a switch ■ # CRITICAL ■ # WARNING ■ # NOTICE ■ # INFO ■ Lowest 6-12 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 89
define a set of IP addresses that are the only ones allowed to connect to the services provided (SSH, HTTP, TELNET, SNMP). This means that an administrator can make sure only ip address> REMOVE IPSECURITY DISABLE IPSECURITY HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 6-13 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 90
with a blade PC supporting the Network server SET NTP PRIMARY Set the secondary NTP server SET NTP SECONDARY Disable the secondary NTP server Support ✎ Only enclosure administrators may execute these tasks. 6-14 HP PC Blade Enclosure Integrated Administrator for CCI v1 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 91
the read must be 1-20 characters long. Both community names support all alphanumeric characters, the underscore, and the dash characters. The default read the appropriate information. 4. Click Apply. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 6-15 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 92
contact> field must be 0-20 characters long and supports all the alphanumeric characters, the underscore, the dash ### ranges from 0 to 255. The Integrated Administrator only supports v1 traps and directs the traps to SNMP port 162 by HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 93
blade PC bays ❏ Opening a remote console session to a blade PC ❏ Accessing ROM-Based Setup Utility for a blade PC ❏ Reviewing the activity for a blade PC ❏ Powering off the blade PC Ä CAUTION: Without the blade PC health driver, the Integrated Administrator cannot gracefully shutdown a blade PC - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 94
Console screen. 6. If the blade PC is running the Windows 2000 operating system: a. Return to the Web-based user interface and click Virtual Buttons in the left panel. Ä CAUTION: Without the blade PC health driver, the Integrated Administrator cannot reboot a blade PC. 7-2 HP PC Blade Enclosure - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 95
+ _ keys. b. Press the D key. Reviewing Activity for a Blade PC ✎ This task can only be performed for a given blade PC bay by enclosure administrators, group administrators, and group members with access rights to the blade PC bay. To access the console log for a blade PC using the Web-based user - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 96
since the last power-on of the Integrated Administrator. Powering Off the Blade PC Ä CAUTION: Without the blade PC health driver or an ACPI-compliant operating system, the Integrated Administrator cannot gracefully shutdown a blade PC. This condition may result in the permanent loss of critical data - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 97
blade PC whose Unit Identification LED you wish to toggle. 4. Click Virtual Buttons at the bottom of the screen. 5. Click Toggle ON or Toggle OFF depending on the current state of the Unit Identification LED for the blade PC. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 98
for a blade PC using the CLI, type: SET BAY UID } [ON | OFF] Managing the Enclosure Reviewing the Activity Problem Components" section in this chapter. To view the System Log using the Web-based user interface: 1. Click the Enclosure tab. 7-6 HP PC Blade Enclosure - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 99
Virtual Buttons in the left panel. 3. Click Toggle ON or Toggle OFF depending on the current state of the Unit Identification LED for the enclosure. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 100
: SHOW ENCLOSURE FAN [ | ALL] This command displays the status, redundancy, partner, speed, and part number for one or all fans in the enclosure. 7-8 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 101
■ A blade PC ■ Over-temperature conditions If the enclosure enters a degraded state at any time, the Web-based user interface of the Integrated Administrator alerts the user with icons along the top of the deck panel. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 7-9 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 102
on System Log in the left panel. 3. Go to the appropriate area in the Integrated Administrator for the spare number of the degraded component. 7-10 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 103
the event list and clicking View Event Details, you can access the area within the Integrated Administrator that provides detailed information about that degraded component. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 7-11 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 104
command displays the location, status (OK, warm, degraded, or failed), and temperature (degrees Fahrenheit or Celsius) for all the temperature sensors of the enclosure. 7-12 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 105
group rights to blade PC bays using the Web-based user interface: 1. Click the Administration tab. 2. Click Group List in the left panel. 3. Click on the group whose rights you wish to modify. 4. Click View/Modify Group. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 7-13 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 106
blade PC To modify rights to blade PC bays for an existing group blade PCs assigned to a group, type: ASSIGN BAY [ALL | }] If a blade PC ■ To remove access rights to blade PC bays for any group, type: HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 107
user interface: 1. Click the Administration tab. 2. Click User List in the left panel. 3. Select the user account you wish to delete from the user list. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 7-15 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 108
using the Web-based user interface: 1. Click the Administration tab. 2. Click Group List in the left panel. 3. Select the group from the group list. 7-16 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 109
Performing Common Administrative Tasks 4. Click Remove Group. To delete a group account using the CLI, type: REMOVE GROUP [ALL | ] If ALL is specified, the command deletes all the group accounts. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 7-17 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 110
Performing Common Administrative Tasks 7-18 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 111
uploads the current runtime configuration to the specified TFTP or FTP server. If your FTP server does not allow anonymous uploading, specify an FTP username and password using the syntax: ftp://username:password@ftpserver/filename HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 112
names, passwords, and For security reasons, passwords are never replicated password server does not support anonymous connections, specify a user name and password by replacing the host part in the above format with username:password HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 113
a password between each command. Using the OpenSSH package, the user can send commands using the following syntax: ssh user@host command You can group together commands to perform a series of actions. To view the health status of the enclosure and all blades with a single command, type: HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 114
having to enter a password between each command sent to the Integrated Administrator. Configuring Blade PC Boot Order Enclosure and setting will make the blade PC(s) boot into the RBSU which can be viewed with the Remote Console functionality. The HDD setting forces the blade PC to boot from the - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 115
off. Ä CAUTION: Without the blade PC health driver or an ACPI-compliant operating system, the Integrated Administrator cannot gracefully shutdown a blade PC. This condition may result in the permanent loss of critical data. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 8-5 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 116
supported firmware associated with the Integrated Administrator can be upgraded remotely using the CLI using the management (10/100 Ethernet) connector located on the rear panel of the enclosure. UPDATE IMAGE The can be any of the following: ■ http://host/path 8-6 HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 117
Recovery mode. 5. When the serial console prompt appears, press the L key. This command boots the system in Lost Password mode, which resets the Administrator password to the factory default and displays it on the console. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 8-7 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 118
and hold the enclosure Unit Identification button (1) and press the Integrated Administrator Reset button (2) simultaneously on the rear panel of the blade PC to place the enclosure in Lost Password/Flash Disaster Recovery mode. 8-8 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 119
the flash memory. ✎ No timeout exists for obtaining a DHCP address. ✎ If the ROM does not download properly or if the verification step fails, Flash Disaster Recovery mode restarts with another attempt to acquire a DHCP address. The Integrated Administrator reboots. HP PC Blade Enclosure Integrated - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 120
Performing Advanced Functions 8-10 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 121
for executing this command for the DHCP environment, but specifying the IP address and netmask are required for executing this command for the static environment. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 122
Command Line Conventions A-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 123
Community string Attempting to power off the enclosure Attempting to restart the Integrated Administrator Attempting to clear the system log Attempting to enable IP Security HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 124
blade immediately? This process may result in the loss of any unsaved data on the blade. Cause The blade that is being viewed has been removed from the enclosure. The current blade clear the system log Valid Input N/A N/A N/A B-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 125
password field. The Password field is empty. Please enter a password. The Confirm Password field is empty. Please enter a password. The password must be at least 3 characters in length. Please enter a new password. The passwords printable characters N/A HP PC Blade Enclosure Integrated Administrator - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 126
server. Attempting to create a 21st group Attempting to create a user with a blank password Attempting to create a user with a blank Password field Attempting to create a user with a blank Confirm Password field Attempting to create a user with a password B-4 HP PC Blade Enclosure Integrated - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 127
never set. Please set the primary NTP server first. Attempting to set the secondary NTP server without first setting the primary NTP server. Invalid IP address supplied. IP address should " and containing a maximum of 64 characters. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 128
Error Messages B-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 129
to the HP PC Blade Enclosure Setup and Installation Guide. Integrated Administrator Troubleshooting Problem Possible Solution My Web browser flickers when I view the Integrated Administrator applet. Be sure the client browser has at least 16-bit color depth. My Web browser is not supported by - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 130
driver; so after installing the health driver, you may need to cycle the blade PC power to enable the Integrated Administrator sees new information. I just got logged out of the GUI. Why? What should I do? Your rights may have changed. If so, log in again to use your new rights. If the problem - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 131
a failure. Enclosure Power supply # has experienced a failure. Enclosure The enclosure temperature has exceeded the critical threshold. Blade in bay # Blade # has experienced a failure. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 132
Event Details The temperature on blade # has exceeded the critical threshold Enclosure Enclosure Blade in bay # < Blade # is in a degraded state. Blade in bay # The temperature on blade # has exceeded the caution threshold. D-2 HP PC Blade - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 133
for the following components of the HP PC Blade Enclosure Integrated Administrator. ■ Enclosure Administrator for fields related to the blade PC enclosure. Default Enclosure Values Field switch console. Groups No default groups are in the Integrated Administrator. HP PC Blade Enclosure - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 134
SSH On TELNET On SNMP On SNMP location (blank) SNMP contact (blank) READ community Public WRITE community (blank) NTP Disabled IP Security Disabled AlertMail Disabled E-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 135
Time Zone Settings This appendix provides a comprehensive list of time zones supported by the HP PC Blade Enclosure Integrated Administrator. These time zones are organized into the following categories UCT Universal UTC WET W-SU Zulu HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 136
Settings Africa The following table provides the African time zone settings supported by the Integrated Administrator. African Time Zone Values Africa:Abidjan Timbuktu Africa:Tripoli Africa:Tunis Africa:Windhoek Egypt Libya --- F-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 137
Settings Asia The following table provides the Asian time zone settings supported by the Integrated Administrator. Asian Time Zone Values Asia:Aden Asia Riyadh87 Mideast:Riyadh88 Mideast:Riyadh89 PRC ROC ROK Singapore Turkey -- HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 138
Settings Europe The following table provides the European time zone settings supported by the Integrated Administrator. European Time Zone Values Eire Europe:Lisbon Europe:Zaporozhye Europe:Zurich GB GB-Eire Poland Portugal F-4 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 139
Settings Oceania The following table provides the Oceanic time zone settings supported by the Integrated Administrator. Oceanic Time Zone Values Atlantic:Azores Pacific:Wake Pacific:Wallis Pacific:Yap US:Hawaii US:Samoa -- HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 140
table provides the polar time zone settings supported by the Integrated Administrator. Polar Time table provides the American time zone settings supported by the Integrated Administrator. American Time Zone :Knox_IN America:La_Paz F-6 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 141
:BajaSur Mexico:General US:Alaska US:Aleutian US:Arizona US:Central US:Eastern US:East-Indiana US:Indiana-Starke US:Michigan US:Mountain US:Pacific --- HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 142
Time Zone Settings F-8 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 143
with Open Source licensing, HP has made the source code of all Open Source components used available at the following URL: opensource.hp.com To locate the Integrated Administrator project, consult the list of all projects. HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide G-1 - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 144
Open Source Availability G-2 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 145
3-2 configuration network 4-8 replicating 8-1 replication 8-1 SNMP 4-9 configuring blade PC boot order 8-4 SNMP support 6-14 connector 3-2 connectors 3-2 console connector 5-2 console log 4-18 creating certificate request 8-2 group 7-13 customizing enclosure settings 6-3 www.hp.com User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 146
console 4-5 firmware upgrading blade PC 7-5 enclosure 7-7 problem components 7-9 IEEE 802.1Q VLAN 2-5 initial IP address 3-2 Integrated Administrator components 3-2 defined 2-1 features 2-1 function 3-1 Integrated Administrator hyperlinks 2-3 Interconnect tab 4-26 Index-2 www.hp.com User Guide - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 147
rear panel components 3-2 recovering password 8-7 remote access 2-2 console 4-17 session 7-1 sessions 6-11 removing trap targets 6-16 replicating configuration 8-1 requirements, local devices 3-3 Reset button 3-2 reviewing blade PC activity 7-3 reviewing configuration tools and information 3-1 RMON - HP Bc1500 | User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 148
E-2 alerts 2-2 configuration 4-9 support 6-14 software tools 2-4 troubleshooting C-1 U Unit Identification LED 7-5, 7-7 universal time F-1 upgrading firmware HP Systems Insight Manager 2-3, 2-4 V view group 4-25 user 4-24 virtual buttons 4-11, 4-17 W warning messages B-1 administration B-2 blade PC
User Guide
HP BladeSystem PC Blade Enclosure Integrated
Administrator for CCI v1.4
Document Part Number: 410728-002
June 2006