HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 19

Requirements for Local Client Devices, Default Values for the Integrated Administrator, Determining

Get HP Bc1500 - BladeSystem - Blade PC PDF manuals and user guides View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 19 highlights

Getting Started Requirements for Local Client Devices You can access the Integrated Administrator locally using the serial connector on the rear panel of the enclosure using a local client device, such as a laptop computer. The local client device must run a terminal emulator, such as HyperTerminal for Windows systems or Kermit for Linux systems. The terminal emulator must operate at the following settings: ■ Bits per second: 9600 ■ Bits: 8 ■ Parity: None ■ Stop bits: 1 ■ Flow control: none ■ Emulation: VT100 ■ Backspace key sends Ctrl-H Default Values for the Integrated Administrator The Integrated Administrator is configured with a default user name, password, and DNS name. A settings tag with the preconfigured values is attached to the interconnect tray containing the Integrated Administrator module. ✎ For security reasons, HP recommends changing the Administrator password when accessing Integrated Administrator for the first time. Determining the IP Address using the Local Console To determine the Integrated Administrator IP address using the local console perform the following steps: 1. Access the Integrated Administrator console: a. Connect a local client device (such as a laptop computer) with VT100 terminal emulation software to the Integrated Administrator (serial) console connector using a null modem serial cable. b. Open a terminal emulation session with the following settings: 9600 bps, 8 data bits, no parity, and 1 stop bit. c. Log into the Integrated Administrator using the password on the settings tag attached to the interconnect tray. 2. Establish the Integrated Administrator IP address. For a detailed explanation of the command line conventions used in this document, see Appendix A, "Command Line Conventions." If a DHCP server is attached to the network, determine the Integrated Administrator IP address. Type the following command at the command line interface: SHOW NETWORK If a DHCP server is not attached to the network, type the following commands sequentially HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide 3-3

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide
3-3
Getting Started
Requirements for Local Client Devices
You can access the Integrated Administrator locally using the serial connector on the rear panel
of the enclosure using a local client device, such as a laptop computer. The local client device
must run a terminal emulator, such as HyperTerminal for Windows systems or Kermit for Linux
systems.
The terminal emulator must operate at the following settings:
■
Bits per second: 9600
■
Bits: 8
■
Parity: None
■
Stop bits: 1
■
Flow control: none
■
Emulation: VT100
■
Backspace key sends Ctrl-H
Default Values for the Integrated Administrator
The Integrated Administrator is configured with a default user name, password, and DNS name.
A settings tag with the preconfigured values is attached to the interconnect tray containing the
Integrated Administrator module.
✎
For security reasons, HP recommends changing the Administrator password when accessing
Integrated Administrator for the first time.
Determining the IP Address using the Local Console
To determine the Integrated Administrator IP address using the local console perform the
following steps:
1. Access the Integrated Administrator console:
a.
Connect a local client device (such as a laptop computer) with VT100 terminal
emulation software to the Integrated Administrator (serial) console connector using a
null modem serial cable.
b.
Open a terminal emulation session with the following settings: 9600 bps, 8 data bits, no
parity, and 1 stop bit.
c.
Log into the Integrated Administrator using the password on the settings tag attached to
the interconnect tray.
2. Establish the Integrated Administrator IP address.
For a detailed explanation of the command line conventions used in this document, see
Appendix A, “Command Line Conventions.”
If a DHCP server is attached to the network, determine the Integrated Administrator IP
address. Type the following command at the command line interface:
SHOW NETWORK
If a DHCP server is not attached to the network, type the following commands sequentially