HP Bc1500 User Guide: HP BladeSystem PC Blade Enclosure Integrated Administrat - Page 66
Blade PC Bay Management Commands continued
View all HP Bc1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Command Line Interface Blade PC Bay Management Commands (continued) GENERATE NMI Generates an NMI on the specified blade. The consequences of an NMI are operating system specific. Only enclosure and group administrators may execute this command. POWEROFF BAY } {FORCE} Performs a graceful shutdown of the blade PC in the specified bay. If the FORCE argument is given, the blade PC is immediately shut down. This means the blade PC could lose data or become unstable. If no blade PC is in the specified bay, the user is told that the bay is empty. Only enclosure and group administrators may execute this command. POWERON BAY } {[PXE | HDD | RBSU]} Powers on the specified blade PC. If no blade PC is in the specified bay, the user is told that the bay is empty. The optional boot arguments may require a firmware update for the BIOS ROM of certain HP blade PCs. Adding an optional boot argument forces the blade to abandon the regular boot order and forces a boot using the specified method. Only enclosure and group administrators may execute this command. REBOOT BAY } {FORCE} {[PXE | HDD | RBSU]} Sends a request to the blade PC to perform a graceful shutdown. The blade PC is then powered on. If no blade PC is in the specified bay, the user is told that the bay is empty. The optional boot arguments may require a firmware update for the BIOS ROM of certain HP blade PCs. Adding an optional boot argument forces the blade to abandon the regular boot order and forces a boot using the specified method. Only enclosure and group administrators may execute this command. SET BAY BOOT FIRST [HDD | PXE] {[ , | ] } Sets the IPL for each subsequent reboot. This setting is only valid for present blades and is cleared if a blade is removed. This command may require a firmware update for the BIOS ROM of certain HP blade PCs. Only enclosure and group administrators may execute this command. SET BAY BOOT ONCE [HDD | PXE | RBSU] } Sets the boot device to be used on the next boot of the bay(s) specified. This setting is only valid on present blades and is cleared if the blade is removed. This command may require a firmware update for the BIOS ROM of certain HP blade PCs. Only enclosure and group administrators may execute this command. 5-16 HP PC Blade Enclosure Integrated Administrator for CCI v1.4 User Guide